DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...
Tecnidro
DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C
The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample
BIAR Sampling systems
Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C
Seal in the drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up ...
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
Seal in the drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up ...
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C
Seal in the drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up ...
Pressure: 17.2 bar
... can independently activate an actuator to open the deluge valve: a pneumatic Dry Pilot detection Line and/or an electric solenoid, connected to sensorst hrough a control panel. Once open, the valve reduces ...
Raphael Valves Industries (1975) Ltd
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... the deluge valve to open. The Deluge system incorporates an emergency valve, bypassing the fire detection systems for manual operation. Designed for vertical or horizontal installation, a globe pattern, ...
Raphael Valves Industries (1975) Ltd
DN: 40 mm - 250 mm
Pressure: 17.2 bar
... high flowrates with minimum head loss. * The valve trips open automatically upon a gradual release of water pressure from its control chamber. The valve is actuated by an electric signal conveyed to ...
Raphael Valves Industries (1975) Ltd
... operation is accomplished by using the geared limit switch and the torque switch inside the Limitorque, to move the poppet valve. The rotary vane air motor is compact and powerful. SMBA is ideal actuator for the use ...
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C
special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics
ASV Stuebbe GmbH & Co. KG
DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h
Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...
ASV Stuebbe GmbH & Co. KG
DN: 10 mm - 25 mm
Pressure: 10 bar - 16 bar
Temperature: -30 °C - 140 °C
Dosing ball valve based on the C 200 Finely adjustable using 180° opening angle Reproducible settings by means of 180° scale disk / scale division 5° Simple automation using electric variable speed actuators
ASV Stuebbe GmbH & Co. KG
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 551 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has an inlet and an outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...
NIHON PISCO CO., Ltd.
DN: 4, 6, 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow in one direction and unrestricted flow in the opposite by an orifice restrictor. It is best ...
NIHON PISCO CO., Ltd.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43
Comparato Nello S.r.l.
DN: 20, 25 mm
3 way MMM BRASS Diamant ball valve 90° – DIVERTING / MIXING 3 vie MMM in OTTONE con codoli e calotte Passaggio totale PN16
Comparato Nello S.r.l.
DN: 20 mm
BY-PASS BRASS Diamant ball valve BY-PASS MMMM BRASS with caps and tangs Full bore PN16
Comparato Nello S.r.l.
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... . 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical & more. Valve ...
Ridart srl
DN: 3, 4 mm
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 60 °C
... 520 19/03/1955 and subséquent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - Application: petroc hernie al. food. pharmac eutic al & more. - Valve ...
Ridart srl
DN: 4, 3, 2 mm
Pressure: 230 mbar - 8,000 mbar
Flow rate: 400 l/min - 3,750 l/min
It’s a Protection System with ribbon coil: déflagration in-line flame arrester in according with Directive 2014/34/EU and harmonized standard EN ISO 16852:2016. - Used for hydrocarbons or chemical pipeline. - Stage II vapor recovery ...
Ridart srl
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
DN: 0.5 in - 3 in
Pressure: 63 bar - 100 bar
Temperature: -46 °C - 400 °C
The AP20P is a valve that belongs to the AP series. It is equipped with metallic seats that permit the engineering of metal seated ball valves. It features ease of maintenance and it does not require ...
Penta Srl
DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C
Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...
Penta Srl
DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C
The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...
Penta Srl
DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water spindle with O-ring EPDM-seat gasket gunmetal cone male union thread with plugged drain ...
Kemper Olpe GmbH
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...
Kemper Olpe GmbH
DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...
Kemper Olpe GmbH
Pressure: 40 bar
Temperature: -40 °C - 150 °C
... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of ...
DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C
Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...
MIX S.R.L.
DN: 150 mm - 800 mm
Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...
MIX S.R.L.
DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C
Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...
MIX S.R.L.
... E-car Battery Pack ex-proof Vavle · Pressure equalization and release in order to extend seal life · Can open the valve rapidly when heating up under a abnormal status. · Prevent condensation · Block contaminants ...
Pressure: 100 mbar - 200 mbar
Overviews Enclosures and containers: a look at their vulnerabilities and the role of Milvent Vents in preventing failure In the high-tech world of today, enclosures and containers are a crucial part of protecting sensitive equipment ...
DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series of ball valves ...
Athena Engineering S.r.l.
DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar
... Entry ball valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation:Lever Gear motor/pneumatic actuators product overview:Athena ...
Athena Engineering S.r.l.
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...
Athena Engineering S.r.l.
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...
UFLOW AUTOMATION
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...
UFLOW AUTOMATION
DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...
UFLOW AUTOMATION
DN: 150, 200, 250 mm
Pressure: 10 bar
The slide valves from Comav are ideally used to cut-off product flow. They are designed to provide an accurate outside sealing, and can work with powder, granules and ground products. Also, the valves ...
COMAV
DN: 150, 200, 250 mm
Pressure: 67 bar
The emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to empty the tank. ...
COMAV
Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...
COMAV
Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C
• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.
... ] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. ...
DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C
... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve is increased ...
DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C
Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN ...
The “singold” Flap Shutter is used for all kinds of bulk material and solid-liquid mixtures, when the container is to be completely emptied. Examples: Container scales, container, primary and secondary vessels in mixing plants, wagons, ...
Two flap shutters mounted one on top of the other form a Double-Flap Sluice. The applications for Double-Flap Sluices are as follows: • When bulk materials are conveyed to another pressure level, such as the discharge from cyclones • ...
Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min
AWF
DN: 150 mm - 180 mm
AWF
Please specify:
Help us improve:
remaining