Impeller pump IMM 50A

waterelectricstationary

They are suitable for the transfer of liquids containing impurities up to 3 mm in size. The hydraulic components: impeller, scroll and pump body in PBT, allow it to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3 ° Engel). The liquid temperature must not exceed 70 °C. Applications: - Machine tools (milling machines-lathes-drills) - Glass processing machines (TRI version) - Air conditioning and conditioning systems They should normally be installed on a tank with a capacity proportionate to the flow rate, about 2-3 cm from the bottom. It is important to check that the maximum liquid level in the tank always remains 3-4 cm lower than the support flange. In cases where the liquid is particularly dirty it is advisable to build the tank with compartments, to allow the deposit of sludge before it is fished out by the pump. Specifications: - Power 1 (kW): 0.09 - Power 2 (kW): 0.04 - Depth Draft (mm): 80 / 120 / 150 / 180 - Conn. Hydraulics ("): 3/8 - Maximum flow (l/min): 22 - Maximum prevalence (mt): 2.5 - Max impurity dim (mm): 3 - Impeller type: Open Materials: - Impeller: Nylon - Pump body: PBT - Impeller-cover: PBT - Shaft: Steel (Aisi 316) Features: - Maximum liquid temperature: 70°C - Maximum viscosity: 21 cSt (3° Engel) - Suitable for water, emulsions, oily substances - Impurities up to 3 mm - Installation: on tank, 2-3 cm from bottom, max liquid level 3-4 cm below flange