Impeller pump SP 150

waterelectricstationary

Suitable for the transfer of liquids containing impurities up to 3 mm in size. The hydraulic components: impeller and nut in PTB, pump body in cast iron, allow it to be used with water, emulsions, and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The liquid temperature must not exceed 70°C. Applications: - Machine tools (milling-lathes) - Glass processing machines (TRI version) - Surface treatment plants - Filtration systems They should normally be installed on a tank with a capacity proportionate to the flow rate, about 4-5 cm from the bottom. It is important to check that the maximum level of liquid in the tank always remains 3-4 cm lower than the support flange. In cases where the liquid is particularly dirty, it is recommended to build the tank with compartments, to allow the deposit of sludge before it is fished out by the pump. Rating plate data: - Power 1 (kW): 1.86 - Power 2 (kW): 1.1 - Depth Draft (mm): 0 - Conn. Hydraulics ("): 1 1/4 - Maximum flow (l/min): 400 - Maximum prevalence (mt): 13 - Max impurity dim (mm): 3 - Impeller type: Open Materials: - Impeller: PBT (option: cast iron) - Pump body: Cast iron - Impeller-cover: PBT (option: cast iron) - Shaft: Steel (option: Aisi 416) - Maximum liquid temperature: 70°C - Maximum viscosity: 21 cSt (3° Engel) - Maximum impurity size: 3 mm - Impeller and nut material: PTB (option: cast iron) - Pump body material: cast iron - Impeller-cover material: PTB (option: cast iron) - Shaft material: steel (option: Aisi 416) - Power: 1.86 kW / 1.1 kW - Maximum flow: 400 l/min - Maximum prevalence: 13 m - Hydraulic connection: 1 1/4" - Depth draft: 0 mm - Impeller type: Open