Flow: 21 m³/h - 168 m³/h
Head: 20 m - 102 m
Input diameter: 1.5, 4, 2, 3 in
TCPOWER MOTOR PUMPS Pumps with small tanks and large capacity depending on the need. Our pumps can be: • Clean water Pumps • High pressure motor ...
ITC Power
Flow: 0 m³/h - 85 m³/h
Head: 0 m - 565 m
Power: 3 kW - 45 kW
... and vibration free smooth operation. The Pumpsets are compact and slim and can be easily installed in narrow wells. Power consumption & operating cost is less due to high pump efficiency. All pumps ...
LUBI INDUSTRIES LLP
Flow: 5, 10.5 l/min
Power: 0.06 kW
- Working Pressure: 1 - 5 Kg/cm - Max. painting pressure: 5 Kg/cm - Max. pump speed: 160 times/min. - Air consumption: 11.5 CFM - Free speed: (1:1) 5 200 RPM - Agitation shaft: 8 mm - Proppeler: 60 mm -Diameter of ring: 318 mm
Pro-Tek
Flow: 25,000 l/h
Head: 5 m - 7 m
Submersible pumps with high capacities are used for the removal and drainage of water from buildings and trenches without using electric power. These pumps have certain advantages that are unique to them. ...
Flow: 5 l/min
Pressure: 2 bar - 7 bar
Head: 70 m
New pump line with a brand new designing that offers reinforced pumping potentials. The updated designing provides even bigger performance provided with economy Benefits • Optimal performance • Economical air consumption, ...
ALPHADYNAMIC PUMPS (UK) LTD
Power: 7 kW - 21 kW
WESPER
... mode. Control is easy because all operations are automated. It operates normally in atmospheric pressure state. Emergency manual operation is available . (needs not by-pass line) Body:SCS13A, Ball:Durability is good ...
Flow: 0 m³/h - 10.8 m³/h
Head: 20 m - 92.5 m
Power: 0.55 kW - 5.5 kW
... chemically pure liquids and free of foreign matters, with temperatures not higher than 80°C. PUMP: Horizontal axis pump with bronze closed impeller, pump body and base support made ...
Conforto
... setting of extremely small pressures. The technical data are based on an air inlet pressure of 8 bar. The pumps of course also function perfectly at low pressures. Krautzberger diaphragm pumps ...
Krautzberger
Flow: 2.4 m³/h - 6.5 m³/h
Head: 0 m - 7 m
Power: 0.32, 0.2 kW
... run dry, the pump is automatically vented via an opening in the discharge elbow. The U3 K(S) must not be used for pumping wastewater containing faeces or wastewater from urinal systems If submersible pumps ...
JUNG PUMPEN
herborner.Fηeo 100% COATED, CLOSE-COUPLED CENTRIFUGAL PUMP WITH HIGHEST EFFICIENCIES DESCRIPTION Highly efficient single stage centrifugal pumps with 100% coating (internal and external) to ...
Herborner Pumpentechnik GmbH & Co KG
Carbon black feeding pump, independently researched and developed by Doright, is a new product of improving feeding stability of carbon black granulator. Carbon black feeding pump is consisted of ...
Flow: 80 l/min - 660 l/min
Pressure: 20 bar - 25 bar
Power: 30, 7.5, 4, 22.5, 15 kW
... Dosanova offers a variety of efficient pumps e.g. for: wash-down systems, CIP systems, trolley washers,... The thoroughly tested range is built on more than 60 years of experience and includes very compact ...
Dosanova bvba
Flow: 0 m³/h - 200 m³/h
Pressure: 24 bar
Fluid temperature: 100 °C
Food-safe pumps with a large suction chamber. Made in polished AISI 304 and/or 316 stainless steel for transferring products of low/medium viscosity.
CSF Inox Spa
Pneumatic dosing pump made of stainless steel AISI 316 for doling out chemicals and fluids Main Features Stainless-steel in AISI316 (1.4408) Double- and single-acting versions Seals in PTFE and FPM Packing in ...
Flow: 1,500 l/min
Power: 65 W
... FEATURES Small foot print, bench top. Silent and free from vibrations. Pump tube held by a simple clamp Glass dosing tip “PECIPUMP” provides precise dispensing. Dispense rate: The pump ...
J.P Selecta
DK pumps are recommended for pumping water and fluid which are not chemically aggressive to the pump components. The open impeller design enables fairly large amounts of impurities to be pumped without ...
FUFA motor
Flow: 10 l/min - 150 l/min
Pressure: 7 bar
Head: 15 m - 62 m
Self-priming horizontal multistage stainless steel pump suitable for domestic use, also in combination with autoclave tanks. Suitable for irrigation, drinking water or glycol distribution, water treatment, heating and ...
Pentax Pumps
Flow: 0 us gal/min - 110 us gal/min
Head: 0'00" ft - 20'00"
Power: 0.03 ch
For neutralization and removal of acidic condensate produced by high-efficiency combustion equipment. When not neutralized, acidic condensate has the potential to harm the environment and any plumbing it comes in contact with due to its ...
Liberty Pumps
Flow: 9 m³/h - 2,500 m³/h
Head: 12 m - 465 m
Power: 7.5 kW - 410 kW
... has simple structure with motor and pump integrated, easy to install, maintain or disassemble, covers little floor space. It works safely and reliably, causes no pollution to water source. QJ Deep Well Submersible Pump ...
Shanghai Weihu Pump Industry
Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m
... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...
Franklin Electric
Flow: 0.43 l/min - 30 l/min
Pressure: 465 psi - 42,500 psi
Width: 180 mm
... liquid pump for pressure testing, chemical injection and hydraulic power. Compact in size, minimal weight and ability to operate in many environments. Hydratron AZ-1 Single Acting Air Driven Liquid Pump ...
HYDRATRON
Flow: 4 m³/h - 400 m³/h
Pressure: 1.6 MPa
Head: 20 m - 125 m
... with a high specific gravity. The YQMPS type pump is a YONJOU standard pump for all the applications listed. The YQMPS type pump can be customized with a heating cavity (heating ...
Zhejiang Yonjou Technology Co., Ltd.
Flow: 18, 15 l/min
Pressure: 8 bar
Head: 1 m - 70 m
Product Code : A8-A1-1 Fluid Inlet-Outlet : 1/4'' NPT Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm Material : PTFE Valve Ball Material : PTFE Valve Seat Material : PTFE Product Code : A8-AS-1 Fluid ...
Gisan Ltd.
Pressure: 2,000 bar - 7,000 bar
Power: 7.5 kW - 55 kW
... products As the only manufacturer of ultra high pressure amplifiers in France, HYDROPROCESS® offers a wide range of high-pressure pump from 2000 to 7000 bar and from 7.5 kW to 55 kW. Our ultra high pressure amplifiers ...
Please specify:
Help us improve:
remaining