- Hydraulics - Pneumatics >
- Valve >
- Valve >
- HAWE
HAWE valves
The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.
Hughes Safety Showers
Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing ...
Hughes Safety Showers
... durable, high pressure 1/2” brass ball float valves (BS1212) pivot to control the flow of water in the tank. Includes a 5 inch plastic float with brass insert. • WRAS approved • Includes x2 ball float valves ...
Hughes Safety Showers
DN: 20 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 100 °C
characteristics ports MK threads G 3/4 - G 1 1/4, FK flanges PN 16/40/100 function NC pressure range 0-16/0-40/0-64/0-100, bar Kv value m³/h 7,4 media gaseous - liquid - highly viscous -, gelatinous - contaminated flow direction ...
Müller co ax GmbH
DN: 6, 8 mm
The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. ...
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 2 l/min
— The CRE valve is a direct operated pressure control valve with electric proportional control with cartridge execution which can be used in blocks and panels with type D-10A seat. — The valve ...
Duplomatic Oleodinamica
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of gaseous fuel flow. This ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for immediate and premium tight shut-off of any type of liquid fuel flow. This ...
Kühme Armaturen GmbH
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic ...
Elettromeccanica Delta S.p.A.
DN: 10 mm - 50 mm
Pressure: 16 bar
Armaturen Arndt
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
manometer gauge cock, light design, female thread x female thread, material: brass
Armaturen Arndt
DN: 0.5 in
Pressure: 250, 400 bar
Temperature: 120, 200 °C
manometer gauge valve, DIN 16271, male thread x sleeve x test connector M20 x 1,5
Armaturen Arndt
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
The modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of ...
ECONEX S.R.L.
DN: 6 in
Pressure: 56 bar
Temperature: 180 °C
... liquid) Ball valve INTEC K210-S-FS/Q1500 L/D. At a leading manufacturer of PVC resins, chlorine and caustic soda, which are important building blocks for pharmaceutical products, water treatment chemicals and plastics, ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C
INTEC K120 Mini plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard ...
KLINGER-SCHÖNEBERG GmbH
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted by damping
MANKENBERG GmbH
DN: 15 mm - 150 mm
Pressure: 16 bar - 40 bar
Temperature: 250 °C
single-seat straight-way valve for high flow rates with balanced cone | highest temperatures up to 350 °C | usable for steam | body made of GS-C25 or CrNiMo-steel | steel / stainless steel, stainless-steel-diaphragm body, ...
MANKENBERG GmbH
DN: 40 mm
Pressure: 10, 20 bar
Temperature: 50 °C
all medium contact parts made of Titanium Grade 2 | extremely corrosion-resistant, lightweight and compact | combined shut-off and pressure reducing function | manageable installation, easy-to-maintain owing to the clamp system | especially ...
MANKENBERG GmbH
... design isolates working parts and top-works from fouling or corrosive service, and nullifies the effects of back pressure on valve performance. The “D” to “T” orifices meet API Standard 526 covering orifice areas and ...
Pressure: 15 bar - 300 bar
Temperature: -20 °C - 100 °C
DPA PROGRESSIVE DIVIDERS LUBRICANT DISPENSING SEQUENCE The initial piston dispenses lubricant to the outlets corresponding to the final piston. The final piston dispenses lubricant to the outlets corresponding to the central piston ...
I.L.C. srl
... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup ...
Max-Air Technology
DN: 10 mm - 25 mm
screw connection G 3/8” – G 1” DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized ...
Ho-matic
DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C
The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...
EFSVALVES
DN: 0.5 in - 4 in
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 80 °C
Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for liquids for reduce pressure in lines, available in different materials and pressure ranges.
EFSVALVES
DN: 50 mm - 250 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C
The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...
EFSVALVES
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... different applications and products Easy maintenance without the need for special tools Sturdiness: valve bodies made from solid bar The BZAW3 is a double seal valve designed to guarantee separation ...
BARDIANI VALVOLE S.p.a.
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
DN: 4, 6 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 150 °C
Valve NBZ-5 is a nebulizer of liquids with venturi effect operation and adjustable spout by means of a knurled ring. It is especially suitable for following uses : Lubrication of machine members. Lubrication and cooling ...
Bonesi Pneumatik s.r.l.
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...
Bonesi Pneumatik s.r.l.
DN: 0.5, 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
UM series one way valves are used when there is the need to keep under pressure one tube, allowing, at the same time, the flow if air to one way.
Bonesi Pneumatik s.r.l.
Planning, construction and delivery of high quality valves for power plant and process heat generation.
At ARIS, you receive high-quality electrical and pneumatic actuators and robust industrial fittings. We supply individual products for self-assembly or replacement drives and accessories. Of course, we also assemble ...
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
DN: 2.5 mm
Smooth operating spindle made of PTFE, valve bore: 0-2,5 mm, with retaining device to avoid complete unscrewing, screw cap and retaining device made of PP, operating temperature: -20 to +150 °C, made of DURAN® tubing, ...
The fast-closing float anti-explosion valve prevents propagation of flame and pressure during explosion to other production equipment. This valve is intended for protection of pipe transport systems.
RSBP spol. s.r.o.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining