- Hydraulics - Pneumatics >
- Valve >
- Valve >
- OMAL
OMAL valves
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...
InterApp AG
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...
Elite Line Industrial Corp.
DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C
... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, ...
Elite Line Industrial Corp.
DN: 3, 4, 6 in
Pressure: 14.2 psi - 170.6 psi
Temperature: -15 °C - 80 °C
... Application of Groove End Pilot Control Pressure Reducing Valve Our Groove End Pilot Control Pressure Reducing Valves are most suitable for Hydraulic systems. Hydraulic Pressure Reducing Valves ...
Elite Line Industrial Corp.
... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
Synthware glass
DN: 9 mm
VALVE, HIGH VACUUM, PTFE, O-RING, THREE-WAY With two 9mm O.D. sidearms sealed to the barrel at a 90® angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the ...
Synthware glass
DN: 9 mm
... primaryseal on the precision formed tapered seat . For replacement Viton® O-ring Kit, see R7010,or R108110.0-8mm high vacuum valve ,180° Accessories: S540004 0-4mm high vacuum plug and control knob Viton® O-ring at ...
Synthware glass
DN: 1 in
Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red)
Unidelta S.p.A.
DN: 0.5 in
Pressure: 25 bar
Temperature: 70 °C
Pressure gauge push-button valves with DVGW approval, PN 25 / gas max. PN 4 bar SKU MXT-341MSPB Body material Brass-nickel-plated
MerxTrade BV
DN: 12 mm
Model: - Level gauge valve with handwheel Connection: - Thread BPS 1/2" Application: - Liquids (water, fuel and oil)
MerxTrade BV
DN: 6.35 mm - 12.7 mm
Pressure: 16 bar
Temperature: -10 °C - 90 °C
Model: - Straight gauge valve - Material body: - Brass CW 617 N according to EN 12165 Connection: - Thread male/female BSPP - Material stem: - Brass CW 614 N according to EN 12164 Material Handle: - Polypropylene Material ...
MerxTrade BV
DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C
General purpose valve with an EPDM liner, offering a long life with low maintenance. Self-lubricating bearings ensure perfect guiding and turning of the shaft without seizure or premature wear. These valves ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical ...
pneumaticairactuator.com
DN: 0.375 in
Electro-Pneumatically operated pinch valve Low power 1.3W, high pinching force for 3/8" Silicon tube. other on request pharma, analyses, instrumentation
Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, Plastic/rubber industry
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Stainless Steel AISI 316 series Port connection 3/4" ÷ 1 1/2" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Brass, Stainless Steel AISI 316 series Port connection 1/4" ÷ 3/8" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
SAF S.R.L.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
SAF S.R.L.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
SAF S.R.L.
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
Principle of the forged steel floating ball valve: This kind of ball valve has a floating ball supported by two valve seats. Under the medium pressure effect, a certain displacement can ...
wenzhou domos fluid equipment co.,ltd
DN: 2 in - 16 in
Pressure: 16 bar - 100 bar
Connection: RF Operator: HW, Gear. Material: Cast Steel, Alloy Steel, Low Temperature Steel, Stainless Steel. Duplex Steel. Etc. Application Standard: Design and Manufacture: BS 1873, ASME B16.34 Face-to-face Dimension: ...
wenzhou domos fluid equipment co.,ltd
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 turns of precision adjustment, and ...
Pressure: 30 bar - 250 bar
Temperature: 80 °C
Flow rate: 8 l/min
Sequence valve as timer: up to 250 bar, Delay 1-10 s - Absorption of pressure peaks - Delay time adjustable - Large adjustment range - Pressure-independent switching sequences possible - Only one adjustment ...
Pressure: 400 bar
Solenoid valve 4/2 is designed to control the lubrication supply in two-wire systems. This valve is capable of using MAX NLGI 2 grease with a maximum pressure of 400 bar (5880 psi). When the main circuit ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
SOATOER is a supplier of lubricating components and systems. The company has long been committed to the design and development of new technologies and new products. SOATOER is a well-known supplier of lubricating components and systems. ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
Pressure: 262 bar
Pneumatically actuated discharge valve for use in systems such as HANDY-H single-line hydraulic barrel pumps or pneumatic pumps. Supply air pressureMax:8 bar Lubrication pressure 241bar Hydraulic pressure required ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent ...
Thermomegatech
DN: 0.5, 0.75 in
Pressure: 10.3, 6.9 bar
Temperature: 149 °C
... Protection Valve is installed into the lowest point within the heated system. The thermal actuator is tee’d into the NPT threaded opening with adequate internal clearance to monitor the water temperature. When the water ...
Thermomegatech
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
Thermomegatech
DN: 25 mm - 500 mm
... Ball: V-type • Body: WCB/CF8/CF8M • Ball:SS316 • Stem:SS316 • Seat PTFE Installable Accessories Solenoid Valve Limit Switch Positioner Air-Filter Regulator
ROPO GmbH
Pressure: 150 psi
• True union design make it have functionality of union and screw. • Easy to disassemble w/o special tool • Less on-line down time for replacement/ maintenance. Time Saving in pipeline maintenance and replacement • Health, ...
ROPO GmbH
DN: 50 mm - 1,500 mm
Pressure: 1, 1.6, 2.5 MPa
... temperature and pressure Installable Accessories Solenoid Valve Limit Switch Positioner Air-Filler Regulator Hand Wheel Pneumatic Valve, Fast Vent Valve, Speed Control ...
ROPO GmbH
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF, Viton® The ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical ...
DN: 1.5, 2, 2.5, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal can come from a controller, main switch, PLC, etc. Depending on the type of the solenoid the ...
A.G.P. VALVULAS 10 SL
DN: 1 in
This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems operation. The valve ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
The valves come in various types: The 5207065 valve this type is an adjustable valve with a remote-controlled air and abrasive cut-off system. The S898 valve on the other ...
DN: 0.125 in
Pressure: 60, 100 psi
Temperature: -18 °C - 49 °C
Manifold sample valve assures continuously flowing, contemporary samples in conjunction with the Sentry Sample Sequencer 5. The unique manifold design provides flow in two directions from the open valve, ...
Sentry Equipment
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C
Cast iron (GJL 250) PN 16 foot valve Viton gaskets. Made in Italy. Fields of application: Fuel - Diesel - Lubricating.
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) ...
Maran e Peracini srl
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...
DIVATEC,SL
DN: 15 mm - 50 mm
... without dead spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very small dead space, high value kv. Advantage • ...
DIVATEC,SL
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
The main function of the 2140 shut-off valve is the controlled opening and closing of pipeline sections via the valve seat integrated in the body. Due to the use of high-quality materials, the fitting ...
Goetze KG Armaturen
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining