DN: 0.5 in
Pressure: 25 bar
Temperature: 70 °C
Pressure gauge push-button valves with DVGW approval, PN 25 / gas max. PN 4 bar SKU MXT-341MSPB Body material Brass-nickel-plated
MerxTrade BV
DN: 0.5 in - 1 in
Pressure: 6 bar
Temperature: 180 °C
Model: - Straight adjustable - Material body: - Stainless steel 1.4408 / CF8M Connection: - Thread BSPP ISO 228 - Material seats: - FKM / PTFE Including: - Pressure gauge Note: - Clean steam Pressure incomming steam check data ...
MerxTrade BV
DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C
... bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1850143 Body ...
MerxTrade BV
DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C
General purpose valve with an EPDM liner, offering a long life with low maintenance. Self-lubricating bearings ensure perfect guiding and turning of the shaft without seizure or premature wear. These valves ...
pneumaticairactuator.com
DN: 0.5 in - 2 in
Pressure: 16 bar
... . 3. Water saving equipment, drinking water equipment. 4. Air-conditioning fan coin(HVAC). Electric Actuator Ball Valve Advantages: Product quality will be guaranteed for 1 year OEM service to help ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical ...
pneumaticairactuator.com
DN: 0.375 in
Electro-Pneumatically operated pinch valve Low power 1.3W, high pinching force for 3/8" Silicon tube. other on request pharma, analyses, instrumentation
Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, Plastic/rubber industry
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Stainless Steel AISI 316 series Port connection 3/4" ÷ 1 1/2" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Brass, Stainless Steel AISI 316 series Port connection 1/4" ÷ 3/8" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
DN: 15 mm
Pressure: 150 bar
Temperature: -29 °C - 120 °C
Forged Steel Globe Valve Manufacturer: Forging Steel Globe Valves, 1/2 Inch, DN15, Class 800 LB, PN150, API 6D. Standard: API 6D. Face to face: ASME B16.10. Test and inspection: API 598.
China MED Valve Co., Ltd.
DN: 40 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C
We Provide Forged One-Piece Ball Valves, Forged Steel 1-Piece Ball Valves, 1-1/2 Inch, DN40, Class 150 LB, PN20, API 6D. Design Standard: API 6D. Face to Face: ASME B16.10. Test and Inspection: API 598.
China MED Valve Co., Ltd.
DN: 600 mm
Pressure: 100 bar
Temperature: -29 °C - 120 °C
We Provide Forged Steel Electric Trunnion Ball Valves, Forged Steel Electric Trunnion Mounted Ball Valves, 24 Inch, DN600, Class 600 LB, PN100, API 6D. Design Standard: API 6D. Face to Face: ASME ...
China MED Valve Co., Ltd.
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
SAF S.R.L.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
SAF S.R.L.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
SAF S.R.L.
DN: 8 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C
... diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm - 50 mm
Pressure: 0.3 bar - 5 bar
Temperature: 0 °C - 180 °C
... sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials ...
VALSTEAM ADCA Engineering S.A.
DN: 1 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 150 °C
... sanitary air vent is a self-acting valve designed for air venting applications with liquids. The valve closes when filled with liquid product. As the level falls, the valve opens if pressure ...
VALSTEAM ADCA Engineering S.A.
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 turns of precision adjustment, and ...
Pressure: 30 bar - 250 bar
Temperature: 80 °C
Flow rate: 8 l/min
Sequence valve as timer: up to 250 bar, Delay 1-10 s - Absorption of pressure peaks - Delay time adjustable - Large adjustment range - Pressure-independent switching sequences possible - Only one adjustment ...
Pressure: 400 bar
Solenoid valve 4/2 is designed to control the lubrication supply in two-wire systems. This valve is capable of using MAX NLGI 2 grease with a maximum pressure of 400 bar (5880 psi). When the main circuit ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
SOATOER is a supplier of lubricating components and systems. The company has long been committed to the design and development of new technologies and new products. SOATOER is a well-known supplier of lubricating components and systems. ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
Pressure: 262 bar
Pneumatically actuated discharge valve for use in systems such as HANDY-H single-line hydraulic barrel pumps or pneumatic pumps. Supply air pressureMax:8 bar Lubrication pressure 241bar Hydraulic pressure required ...
SOATO FLUID SYSTEM (SHANGHAI)CO.,LTD
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent ...
Thermomegatech
DN: 0.5, 0.75 in
Pressure: 10.3, 6.9 bar
Temperature: 149 °C
... Protection Valve is installed into the lowest point within the heated system. The thermal actuator is tee’d into the NPT threaded opening with adequate internal clearance to monitor the water temperature. When the water ...
Thermomegatech
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
Thermomegatech
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF, Viton® The ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical ...
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
Hydraulic control valve used to control water level in tanks and reservoirs by means of a differential float valve. When the water reaches the upper preset level the valve closes completely ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal can come from a controller, main switch, PLC, etc. Depending on the type of the solenoid the ...
A.G.P. VALVULAS 10 SL
DN: 0.125 in
Pressure: 60, 100 psi
Temperature: -18 °C - 49 °C
Manifold sample valve assures continuously flowing, contemporary samples in conjunction with the Sentry Sample Sequencer 5. The unique manifold design provides flow in two directions from the open valve, ...
Sentry Equipment
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C
Cast iron (GJL 250) PN 16 foot valve Viton gaskets. Made in Italy. Fields of application: Fuel - Diesel - Lubricating.
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) ...
Maran e Peracini srl
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...
DIVATEC,SL
DN: 15 mm - 50 mm
... without dead spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very small dead space, high value kv. Advantage • ...
DIVATEC,SL
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
The main function of the 2140 shut-off valve is the controlled opening and closing of pipeline sections via the valve seat integrated in the body. Due to the use of high-quality materials, the fitting ...
Goetze KG Armaturen
Stainless steel butterfly valve, material: S.S.304,S.S.316. We can offer this stainless steel butterfly valve according with SMS, DIN, ISO standard. Competitive price, with fast delivery time, most ...
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min
FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line installation. FR1-06-KD ...
The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.
Hughes Safety Showers
Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing ...
Hughes Safety Showers
... durable, high pressure 1/2” brass ball float valves (BS1212) pivot to control the flow of water in the tank. Includes a 5 inch plastic float with brass insert. • WRAS approved • Includes x2 ball float valves ...
Hughes Safety Showers
DN: 20 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 100 °C
characteristics ports MK threads G 3/4 - G 1 1/4, FK flanges PN 16/40/100 function NC pressure range 0-16/0-40/0-64/0-100, bar Kv value m³/h 7,4 media gaseous - liquid - highly viscous -, gelatinous - contaminated flow direction ...
Müller co ax GmbH
Please specify:
Help us improve:
remaining