Product overview- Planetary gearhead 14GPT 166:1 for compact high‑torque transmissions.
- Nominal diameter: 14 mm.
- Reduction ratio (shown variant): 166:1 — many other ratios available.
- Stainless steel housing and geartrain; compact length suitable for motor combinations.
Key features- Number of gear stages: 3 (selected variant)
- Continuous torque, max.: 0.35 Nm
- Intermittent torque, max.: 0.46 Nm
- Peak torque: 0.85 Nm
- Length without motor (L2): 24.1 mm
- Reduced backlash typical: 1.1° (no-load)
Advantages- Very compact axial length for space-constrained assemblies
- High continuous torque in a 14 mm diameter envelope
- Suitable for intermittent and impulsive duty cycles
- High allowable intermittent input speed up to 20,000 min⁻¹
- Wide choice of reduction ratios and motor combinations
Available variants (examples)- Reduction ratios (examples): 3.3:1, 4.9:1, 5.8:1, 7.1:1, 11:1, 16:1, 19:1, 23:1, 29:1, 35:1, 41:1, 50:1, 54:1, 63:1, 78:1, 95:1, 116:1, 136:1, 166:1, 203:1, 248:1, 313:1, 384:1, 468:1, 573:1, 671:1, 822:1, 1002:1, 1228:1, 1437:1
- Variants available with 1 to 4 stages; length changes with stage count and ratio.
Product details (summary)Number of gear stages: 3
Reduction ratio: 166
Continuous torque, max.: 0.35 Nm
Intermittent torque, max.: 0.46 Nm
Peak torque: 0.85 Nm
Continuous input speed, max.: 20000 min⁻¹
Intermittent input speed, max.: 24000 min⁻¹
Continuous output power, max.: 2.5 W
Intermittent output power, max.: 3.5 W
Efficiency, max.: 70 %
Input inertia with pinion, max.: 5.35 gmm²
Torsional stiffness, typical: 1 Nm/°
Backlash, at no-load, typical: 1.1 °
Length without motor L2: 24.1 mm
Mass without motor, approx.: 21 g
Operating temperature range: -30 ... 120 °C
Housing material: stainless steel
Geartrain material: stainless steel
Technical specifications- Category: Planetary gearheads
- Diameter: 14 mm
- Number of gear stages: 3 (selected variant)
- Reduction ratio (selected variant): 166:1
- Continuous torque (max): 0.35 Nm
- Intermittent torque (max): 0.46 Nm
- Peak torque: 0.85 Nm
- Continuous input speed (max): 20,000 min⁻¹
- Intermittent input speed (max): 24,000 min⁻¹
- Continuous output power (max): 2.5 W
- Intermittent output power (max): 3.5 W
- Efficiency (max): 70 %
- Input inertia with pinion (max): 5.35 gmm²
- Torsional stiffness (typical): 1 Nm/°
- Backlash at no-load (typical): 1.1 °
- Mass without motor (approx.): 21 g
- Length without motor L2: 24.1 mm
- Operating temperature: -30 ... 120 °C
- Housing and geartrain material: stainless steel