Planetary gearhead 32GPT HT 419:1
coaxialsolid-shaft5 - 10 Nm

Planetary gearhead - 32GPT HT 419:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm
Planetary gearhead - 32GPT HT 419:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm
Planetary gearhead - 32GPT HT 419:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm - image - 2
Planetary gearhead - 32GPT HT 419:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm - image - 3
Add to favorites
Compare this product

Characteristics

Type
planetary
Shaft orientation
coaxial
Shaft configuration
solid-shaft
Torque
10 - 20 Nm, 5 - 10 Nm
Configuration
miniature
Number of stages
four-stage
Performance
precision, high-torque, low-backlash, high-speed
Other characteristics
stainless steel
Rotational speed

Max.: 10,500 rpm
(65,973.4457 rad.min-1)

Min.: 0 rpm
(0 rad.min-1)

Power

12 W, 15 W
(0.02 hp, 0.02 hp)

Backlash

0.6 °

Gear ratio

419 unit

Weight

271 g
(9.56 oz)

Description

Product
Planetary gearhead FAULHABER Series 32GPT HT — high-torque micro planetary gearbox, Ø 32 mm, variant 419:1. Designed for high continuous and intermittent torques and for intermittent/impulsive duty cycles. Stainless steel housing and geartrain for extended operating conditions.

Key Features
Number of gear stages: 4
Continuous torque, max.: 10 Nm
Intermittent torque, max.: 12 Nm
Reduction ratio: 419:1
Diameter: 32 mm
Length (without motor): 57.7 mm

Advantages
  • High continuous and intermittent torque capacity
  • Robust design for intermittent or impulsive cycles
  • High intermittent input speed up to 10,500 min-1
  • High radial and axial shaft load capability
  • Reduced backlash for precise positioning
  • Wide range of reduction ratios available
  • Large selection of motor combination options
  • Multiple standard options for integration


Product details / Properties
Number of gear stages: 4
Reduction ratio: 419:1
Continuous torque, max.: 10 Nm
Intermittent torque, max.: 12 Nm
Peak torque: 18 Nm
Continuous input speed, max.: 7000 min-1
Intermittent input speed, max.: 9000 min-1 (short peaks up to 10,500 min-1)
Continuous output power, max.: 12 W
Intermittent output power, max.: 15 W
Efficiency, max.: 72 %
Input inertia with pinion, max.: 193 gmm²
Torsional stiffness, typical: 25 Nm/°
Backlash, no-load, typical: 0.6 °
Length without motor L2: 57.7 mm
Mass without motor, approx.: 271 g
Operating temperature range: -30 ... 120 °C
Direction of rotation (drive → output): =
Housing material: stainless steel
Geartrain material: stainless steel

Technical specifications / Characteristics
  • Series: 32GPT HT
  • Diameter: 32 mm
  • Length (variant dependent): 49.3 mm or 57.7 mm
  • Number of stages: 3 or 4 (variant dependent)
  • Reduction ratios available: 45 ... 1216 (example variant: 419:1)
  • Max continuous torque: up to 10 Nm
  • Max intermittent torque: up to 12 Nm
  • Peak torque: up to 18 Nm
  • Max continuous input speed: 7000 min-1
  • Max intermittent input speed: 9000 min-1 (short peaks up to 10,500 min-1)
  • Typical torsional stiffness: 25 Nm/°
  • Typical no-load backlash: 0.6 °
  • Materials: stainless steel housing and geartrain
  • Operating temperature: -30 to 120 °C
  • Mass without motor (419:1 variant): approx. 271 g

Catalogs

No catalogs are available for this product.

See all of FAULHABER Drive Systems‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

SPS 2026
SPS 2026

24-26 Nov 2026 Nuremberg (Germany) Hall 4 - Stand 346

  • More information

    Other FAULHABER Drive Systems products

    Precision Gearheads

    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
    About DirectIndustry
    DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.