Planetary gearhead 22GPT 11:1
coaxialsolid-shaft0.5 - 1 Nm

Planetary gearhead - 22GPT 11:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 0.5 - 1 Nm
Planetary gearhead - 22GPT 11:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 0.5 - 1 Nm
Planetary gearhead - 22GPT 11:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 0.5 - 1 Nm - image - 2
Planetary gearhead - 22GPT 11:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 0.5 - 1 Nm - image - 3
Add to favorites
Compare this product

Characteristics

Type
planetary
Shaft orientation
coaxial
Shaft configuration
solid-shaft
Torque
1 - 5 Nm, 0.5 - 1 Nm
Number of stages
two-stage
Performance
high-torque, low-backlash
Other characteristics
stainless steel
Rotational speed

Max.: 15,000 rpm
(94,247.7796 rad.min-1)

Min.: 0 rpm
(0 rad.min-1)

Power

12 W, 18 W
(0.02 hp, 0.02 hp)

Backlash

0.8 °

Gear ratio

11 unit

Weight

58 g
(2.05 oz)

Description

Overview
FAULHABER high-torque planetary gearhead, series 22GPT. Nominal diameter 22 mm. Wide range of reduction ratios (example range 3…1294). Variant shown: reduction 11:1. Designed for compact length, high continuous torque and robustness under intermittent or impulse cycles.

Key features
Number of gear stages: 2
Continuous torque (typical): 0.8 Nm
Intermittent torque (typical): 1.1 Nm
Reduction ratio: 11:1
Diameter: 22 mm
Length (without motor, L2): 26.2 mm

Product details / notes
This gearhead is normally supplied only as a component within a motor+gearhead combination. Availability: delivery time on request. Specific performance depends on chosen variant and motor combination.

Advantages
  • Very compact overall length
  • High continuous torque for size
  • Robust design for intermittent or impulsive duty cycles
  • High permissible intermittent speeds (up to 20,000 min-1 depending on variant)
  • Reduced backlash
  • Wide choice of reduction ratios
  • Large selection of motor combinations
  • Many standard options available

Technical specifications
  • Series: 22GPT
  • Number of gear stages: 2 (for 11:1 variant)
  • Reduction ratio (example): 11:1 (available range 3…1294)
  • Continuous torque, max.: 0.8 Nm
  • Intermittent torque, max.: 1.1 Nm
  • Peak torque: 2.5 Nm
  • Continuous input speed, max.: 12000 min⁻¹
  • Intermittent input speed, max.: 15000 min⁻¹
  • Continuous output power, max.: 12 W
  • Intermittent output power, max.: 18 W
  • Efficiency, max.: 82 %
  • Input inertia with pinion, max.: 50 g·mm²
  • Torsional stiffness (typical): 11 Nm/°
  • Backlash at no-load (typical): 0.8°
  • Length without motor (L2): 26.2 mm (variant dependent)
  • Mass without motor, approx.: 58 g
  • Operating temperature range: -30 … 120 °C
  • Direction of rotation (drive to output): = (same)
  • Housing material: stainless steel
  • Geartrain material: stainless steel

Catalogs

No catalogs are available for this product.

See all of FAULHABER Drive Systems‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

SPS 2026
SPS 2026

24-26 Nov 2026 Nuremberg (Germany) Hall 4 - Stand 346

  • More information

    Other FAULHABER Drive Systems products

    Precision Gearheads

    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
    About DirectIndustry
    DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.