Product overviewThe FAULHABER 22GPT HT planetary gearhead is engineered for compact high-torque applications. With a 22 mm diameter housing it supports multiple reduction ratios and motor combinations; the variant illustrated here uses a 73:1 reduction.
Key features- Gear stages: 3 (example variant 73:1)
- Continuous torque (max): 2.7 Nm
- Intermittent torque (max): 4 Nm
- Reduction ratio (example): 73:1
- Diameter: 22 mm
- Length without motor (L2): 37.3 mm (variant-dependent)
Advantages- High continuous and intermittent torque capacity
- Robust design for intermittent or impulsive load cycles
- Intermittent input speed up to 10,500 min-1
- High radial and axial shaft load capability
- Reduced backlash
- Wide range of reduction ratios
- Large selection of motor combinations
- Numerous standard options
Technical data (summary)Number of gear stages: 3
Reduction ratio (example): 73
Continuous torque, max.: 2.7 Nm
Intermittent torque, max.: 4 Nm
Peak torque: 10 Nm
Continuous input speed, max.: 9000 min-1
Intermittent input speed, max.: 10500 min-1
Continuous output power, max.: 8 W
Intermittent output power, max.: 12 W
Efficiency, max.: 70 %
Input inertia with pinion, max.: 40 gmm²
Torsional stiffness, typical: 5 Nm/°
Backlash, no-load, typical: 0.8 °
Length without motor L2: 37.3 mm
Mass without motor, approx.: 94 g
Operating temperature range: -30 ... 120 °C
Direction of rotation (drive to output): =
Housing material: stainless steel
Geartrain material: stainless steel
Specifications / technical data- Series: 22GPT HT
- Diameter: 22 mm
- Available reduction ratios (examples): 45:1, 50:1, 66:1, 73:1, 99:1, 126:1, 135:1, 145:1, 163:1, 184:1, 198:1, 220:1, 266:1, 330:1, 419:1, 484:1, 653:1, 614:1, 829:1, 958:1, 1216:1
- Gear stages: 3 (some variants 4 for higher ratios)
- Continuous torque (typ./max): up to 2.7 Nm
- Intermittent torque (typ./max): up to 4 Nm (variants up to 5 Nm)
- Peak torque: up to 10 Nm
- Continuous input speed, max.: 9000 min-1
- Intermittent input speed, max.: 10500 min-1
- Continuous output power, max.: 8 W
- Intermittent output power, max.: 12 W
- Efficiency, max.: 70 %
- Input inertia with pinion, max.: 40 gmm²
- Torsional stiffness, typical: 5 Nm/°
- Backlash (no-load), typical: 0.8 °
- Length without motor L2 examples: 37.3 mm (higher-ratio variants may use 43.6 mm)
- Mass without motor: approx. 94 g
- Operating temperature: -30 °C to 120 °C
- Housing and geartrain material: stainless steel