Product overviewPlanetary gearhead FAULHABER 32GPT HT series with high-torque design. Intended for high continuous and intermittent torque applications, suitable for intermittent or impulsive cycles. Available in multiple reduction ratios up to 1216:1; nominal diameter 32 mm; stainless-steel housing and geartrain.
Key features (summary)Number of gear stages: 4
Torque (continuous) up to: 10 Nm
Intermittent torque up to: 12 Nm
Reduction ratio (example): 1216:1
Diameter: 32 mm
Length (example): 57.7 mm
Advantages- High continuous and intermittent torque capacity
- Robust design for intermittent or impulsive load cycles
- High intermittent input speed up to 10,500 min⁻¹
- High radial and axial shaft load capability
- Reduced backlash (typ. 0.6° no-load)
- Wide range of reduction ratios
- Large selection of motor combinations
- Multiple standard options
Variants and notesThe 32GPT HT series is offered in numerous variants (example ratios from 45:1 up to 1216:1). Lengths and nominal torques depend on the chosen configuration; typical lengths without motor include 49.3 mm or 57.7 mm. Verify variant-specific data when selecting.
Technical specifications- Series: 32GPT HT
- Number of gear stages: 4
- Reduction ratio (example variant): 1216:1
- Continuous torque, max.: 10 Nm
- Intermittent torque, max.: 12 Nm
- Peak torque: 18 Nm
- Continuous input speed, max.: 7000 min⁻¹
- Intermittent input speed, max.: 9000 min⁻¹
- Intermittent peak speed (application dependent): up to 10,500 min⁻¹
- Continuous output power, max.: 12 W
- Intermittent output power, max.: 15 W
- Efficiency, max.: 72 %
- Input inertia with pinion, max.: 193 gmm²
- Torsional stiffness, typical: 25 Nm/°
- Backlash, at no-load, typical: 0.6 °
- Length without motor (L2): 57.7 mm
- Mass without motor, approx.: 271 g
- Operating temperature range: -30 ... 120 °C
- Housing material: stainless steel
- Geartrain material: stainless steel