Planetary gearhead 32GPT HT 45:1
coaxialsolid-shaft5 - 10 Nm

Planetary gearhead - 32GPT HT 45:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm
Planetary gearhead - 32GPT HT 45:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm
Planetary gearhead - 32GPT HT 45:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm - image - 2
Planetary gearhead - 32GPT HT 45:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 5 - 10 Nm - image - 3
Add to favorites
Compare this product

Characteristics

Type
planetary
Shaft orientation
coaxial
Shaft configuration
solid-shaft
Torque
10 - 20 Nm, 5 - 10 Nm
Number of stages
three-stage
Performance
precision, high-torque, low-backlash, high-speed, high load capacity
Other characteristics
stainless steel
Rotational speed

Max.: 10,500 rpm
(65,973.4457 rad.min-1)

Min.: 0 rpm
(0 rad.min-1)

Power

14 W, 20 W
(0.02 hp, 0.03 hp)

Backlash

0.6 rad

Gear ratio

45 unit

Weight

230 kg
(507.06 lb)

Description

Overview
FAULHABER planetary gearhead Series 32GPT HT (High Torque). Diameter: 32 mm. Example reduction ratio: 45:1 (multiple ratios available across the series). Designed for high continuous and intermittent torque, low backlash and high radial/axial shaft loads; suitable for intermittent or impulsive cycles.

Key features
  • Number of gear stages: 3
  • Reduction ratio (example): 45:1
  • Continuous torque, max.: 7.4 Nm
  • Intermittent torque, max.: 10 Nm
  • Peak torque: 14 Nm
  • Diameter: 32 mm
  • Length without motor (L2): 49.3 mm


Advantages
  • High continuous and intermittent torque
  • Robust design for intermittent or impulsive cycles
  • High intermittent input speed up to 10,500 min⁻¹ (depending on variant and conditions)
  • High radial and axial shaft load capacity
  • Reduced backlash for precision positioning
  • Wide range of reduction ratios
  • Large selection of motor combinations
  • Many standard options available


Specifications
  • Series / designation: 32GPT HT
  • Model: 32GPT HT 45:1
  • Number of gear stages: 3
  • Reduction ratio (example): 45:1
  • Continuous torque, max.: 7.4 Nm
  • Intermittent torque, max.: 10 Nm
  • Peak torque: 14 Nm
  • Continuous input speed, max.: 7000 min⁻¹
  • Intermittent input speed, max.: 9000 min⁻¹
  • Intermittent input speed (short peaks): up to 10,500 min⁻¹ (application dependent)
  • Continuous output power, max.: 14 W
  • Intermittent output power, max.: 20 W
  • Efficiency, max.: 77 %
  • Input inertia with pinion, max.: 196 gmm²
  • Torsional stiffness, typical: 25 Nm/°
  • Backlash, no-load, typical: 0.6 °
  • Length without motor L2: 49.3 mm
  • Mass without motor, approx.: 230 g
  • Operating temperature range: -30 ... 120 °C
  • Direction of rotation (drive → output): =
  • Housing material: stainless steel
  • Geartrain material: stainless steel

Catalogs

No catalogs are available for this product.

See all of FAULHABER Drive Systems‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

SPS 2026
SPS 2026

24-26 Nov 2026 Nuremberg (Germany) Hall 4 - Stand 346

  • More information

    Other FAULHABER Drive Systems products

    Precision Gearheads

    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
    About DirectIndustry
    DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.