Product overviewFAULHABER planetary gearhead Series 16GPT (high torque). Compact stainless-steel planetary gearhead offering a wide range of reduction ratios. Typical applications: when high continuous torque, reduced backlash and compact length are required. Diameter: 16 mm. Reduction ratio family covers 3.3:1 to 1437:1. Supplied as a gearhead component to be combined with various motors.
Key featuresNumber of gear stages: 4
Torque up to (continuous): 0.6 Nm
Intermittent torque up to: 0.8 Nm
Reduction ratio (this variant): 1002
Diameter: 16 mm
Length without motor (L2, this variant): 29.4 mm
Advantages- Compact length
- High continuous torque
- Robust for intermittent or impulse cycles
- High intermittent input speed up to 20,000 min⁻¹
- Reduced backlash (typ. 1.3° no-load)
- Wide range of reduction ratios
- Large selection of motor combinations
- Many standard options
Product propertiesNumber of gear stages: 4
Reduction ratio: 1002
Continuous torque, max.: 0.6 Nm
Intermittent torque, max.: 0.8 Nm
Peak torque: 1.25 Nm
Continuous input speed, max.: 20000 min⁻¹
Intermittent input speed, max.: 24000 min⁻¹
Continuous output power, max.: 2.4 W
Intermittent output power, max.: 3 W
Efficiency, max.: 60 %
Input inertia with pinion, max.: 3.7 gmm²
Torsional stiffness, typical: 1.8 Nm/°
Backlash, at no-load, typical: 1.3 °
Length without motor L2: 29.4 mm
Mass without motor, approx.: 33.5 g
Operating temperature range: -30 ... 120 °C
Direction of rotation (drive to output): =
Housing material: stainless steel
Geartrain material: stainless steel
NotesThis product is supplied primarily as a gearhead component and is intended to be purchased in combination with a motor.
Technical specifications- Series: 16GPT
- Diameter: 16 mm
- Number of gear stages: 4
- Selected reduction ratio (variant): 1002
- Continuous torque (M_D), max.: 0.6 Nm
- Intermittent torque (M_int.), max.: 0.8 Nm
- Peak torque: 1.25 Nm
- Continuous input speed, max.: 20,000 min⁻¹
- Intermittent input speed, max.: 24,000 min⁻¹
- Continuous output power, max.: 2.4 W
- Intermittent output power, max.: 3 W
- Maximum efficiency: 60 %
- Input inertia with pinion, max.: 3.7 gmm²
- Torsional stiffness (typical): 1.8 Nm/°
- Backlash at no-load (typical): 1.3 °
- Length without motor (L2): 29.4 mm (overall lengths vary by ratio)
- Mass without motor (approx.): 33.5 g
- Operating temperature range: -30 to 120 °C
- Housing and geartrain material: stainless steel