OverviewPlanetary gearhead Series 22GPT HT (High Torque) from FAULHABER. Diameter: 22 mm. 3 gear stages. Wide range of reduction ratios available (45:1 to 1216:1). Designed for high continuous and intermittent torque, robust intermittent/impulsive operation, high intermittent input speed and high radial/axial loads.
Key featuresNumber of gear stages: 3
Reduction ratio (example): 66:1
Continuous torque, max.: 2.7 Nm
Intermittent torque, max.: 4 Nm
Diameter: 22 mm
Length (without motor): 37.3 mm
Advantages- High continuous and intermittent torque
- Robust under intermittent or impulsive loads
- High intermittent input speed up to 10,500 min⁻¹
- High radial and axial shaft load capacity
- Reduced backlash
- Multiple reduction ratios and motor combinations
- Many standard options
Product details (summary of key data)Continuous torque, max.: 2.7 Nm
Intermittent torque, max.: 4 Nm
Peak torque: 10 Nm
Continuous input speed, max.: 9000 min⁻¹
Intermittent input speed, max.: 10500 min⁻¹
Continuous output power, max.: 8 W
Intermittent output power, max.: 12 W
Efficiency, max.: 70 %
Input inertia with pinion, max.: 40 gmm²
Torsional stiffness, typical: 5 Nm/°
Backlash, at no-load, typical: 0.8 °
Length without motor L2: 37.3 mm
Mass without motor, ca.: 94 g
Operating temperature range: -30 ... 120 °C
Housing material: stainless steel
Geartrain material: stainless steel
Characteristics / Technical specifications- Series / model: 22GPT HT
- Available reduction ratios: 45:1 up to 1216:1 (many standard ratios available)
- Number of gear stages: 3
- Diameter: Ø 22 mm
- Lengths (without motor): 37.3 mm (some variants 43.6 mm)
- Continuous torque (variant dependent): up to 2.7 Nm
- Intermittent torque: up to 4 Nm
- Peak torque: up to 10 Nm
- Continuous input speed, max.: 9000 min⁻¹
- Intermittent input speed, max.: 10500 min⁻¹
- Max efficiency: 70 %
- Input inertia with pinion, max.: 40 gmm²
- Torsional stiffness, typical: 5 Nm/°
- Backlash, no-load, typical: 0.8 °
- Mass without motor: ca. 94 g
- Operating temperature: -30 ... 120 °C
- Materials: housing and geartrain in stainless steel
NoteThis gearhead is intended for integration with a motor; availability and delivery times may vary depending on the motor-gearhead combination and selected variant. Datasheets and technical downloads available for different ratios and combinations.