OverviewFAULHABER planetary gearhead Series 32GPT LN, variant 59:1. Low-noise version (up to -10 dB). Diameter: 32 mm. Designed for compact drive applications requiring a balance of continuous and intermittent torque, multiple reduction ratios and a wide range of motor combinations.
Key Features- Number of gear stages: 2 to 4 depending on reduction ratio
- Compact length variants (L without motor vary by ratio)
- High continuous torque for its size
- High intermittent input speed capability (up to 20,000 min⁻¹ depending on variant)
- Reduced backlash (typical no-load backlash ≈ 0.6°)
- Wide selection of reduction ratios and motor combinations
- Robust design for intermittent or impulsive cycles
Product Key DataNumber of gear stages: 3
Continuous torque (max.): 4 Nm
Intermittent torque (max.): 5.2 Nm
Peak torque: 9 Nm
Reduction ratio (example variant): 59
Diameter: 32 mm
Length without motor (L2) for selected variant: 43.1 mm
Housing material: stainless steel
Geartrain material: plastic / stainless steel
Advantages- Compact installation length
- High continuous torque relative to size
- Suitable for intermittent or impulse-loaded cycles
- High short-term speed capability
- Low backlash
- Many reduction ratios available
- Large selection of motor combinations and standard options
Product Details (properties)Number of gear stages: 3
Reduction ratio: 59 (example variant) — variants available from 14 up to 1294
Continuous torque, max.: 4 Nm
Intermittent torque, max.: 5.2 Nm
Peak torque: 9 Nm
Continuous input speed, max.: 11000 min⁻¹
Intermittent input speed, max.: 14000 min⁻¹
Continuous output power, max.: 14 W
Intermittent output power, max.: 20 W
Efficiency, max.: 82 %
Input inertia with pinion, max.: 125 gmm²
Torsional stiffness, typical: 14 Nm/°
Backlash, at no-load, typical: 0.6 °
Length without motor L2 (example): 43.1 mm
Mass without motor, ca.: 194 g
Operating temperature range: -30 ... 110 °C
Direction of rotation, drive to output: =
Housing material: stainless steel
Geartrain material: plastic/stainless steel
Technical specifications- Series: 32GPT LN
- Diameter (Ø): 32 mm
- Available reduction ratios: 14, 16, 20, 24, 30, 41, 44, 49, 59, 72, 89, 108, 131, 158, 178, 196, 215, 267, 323, 401, 474, 588, 711, 862, 1042, 1294 (selection varies by variant)
- Number of gear stages: 2–4 depending on ratio
- Continuous torque (typical max): 4 Nm (variant dependent)
- Intermittent torque (typical max): 5.2 Nm (variant dependent)
- Peak torque: up to 9 Nm
- Continuous input speed (max): 11,000 min⁻¹
- Intermittent input speed (max): 14,000 min⁻¹
- Efficiency (max): 82 %
- Torsional stiffness (typ.): 14 Nm/°
- Backlash (typ. at no-load): 0.6°
- Length options without motor (L2): e.g. 34.7 mm, 43.1 mm, 51.5 mm (depending on ratio)
- Mass without motor: approx. 194 g
- Operating temperature range: -30 to 110 °C