OverviewPlanetary gearhead FAULHABER Series 32GPT HT, diameter 32 mm. The 4-stage design exemplified here with reduction 614:1 is engineered for high continuous and intermittent torque, robust operation under impulsive cycles and broad motor compatibility with multiple standard options.
Key features- Number of gear stages: 4
- Continuous torque (max): 10 Nm
- Intermittent torque (max): 12 Nm
- Reduction ratio (example): 614:1
- Diameter: 32 mm
- Length without motor (L2): 57.7 mm
Advantages- High continuous and intermittent torque capacity
- Very robust for intermittent or impulsive cycles
- High intermittent input speed up to 10,500 min⁻¹
- High radial and axial shaft load capability
- Reduced backlash for accurate positioning
- Wide selection of reduction ratios
- Large range of motor combination options
- Many standard configuration choices
Product properties (values)- Number of gear stages: 4
- Reduction ratio: 614
- Continuous torque, max.: 10 Nm
- Intermittent torque, max.: 12 Nm
- Peak torque: 18 Nm
- Continuous input speed, max.: 7000 min⁻¹
- Intermittent input speed, max.: 9000 min⁻¹
- Continuous output power, max.: 12 W
- Intermittent output power, max.: 15 W
- Efficiency, max.: 72 %
- Input inertia with pinion, max.: 193 gmm²
- Torsional stiffness, typical: 25 Nm/°
- Backlash, no-load, typical: 0.6 °
- Length without motor L2: 57.7 mm
- Mass without motor, ca.: 271 g
- Operating temperature range: -30 ... 120 °C
- Housing material: stainless steel
- Geartrain material: stainless steel
Technical specifications- Series: 32GPT HT
- Model example on this page: 32GPT HT 614:1
- Available reduction ratios (examples): 45:1 ... 1216:1
- Diameter (Ø): 32 mm
- Length variants without motor: 49.3 mm and 57.7 mm depending on ratio
- Continuous torque (max): 10 Nm
- Intermittent torque (max): 12 Nm
- Peak torque: 18 Nm
- Continuous input speed (max): 7000 min⁻¹
- Intermittent input speed (max): 9000 min⁻¹ (intermittent peaks up to 10,500 min⁻¹ possible)
- Continuous output power (max): 12 W
- Intermittent output power (max): 15 W
- Efficiency (max): 72 %
- Input inertia with pinion (max): 193 gmm²
- Torsional stiffness (typical): 25 Nm/°
- Backlash at no-load (typical): 0.6 °
- Mass without motor: approx. 271 g
- Operating temperature: -30 °C to 120 °C
- Housing and geartrain material: stainless steel