OverviewFAULHABER planetary gearhead Series 22GPT LN. Low noise (up to -10 dB). Diameter: 22 mm. Selected variant: reduction ratio 108:1, 3 gear stages. Designed for compact length and high continuous torque; intended to be combined with a motor (sold as motor‑gearhead assemblies).
Key featuresNumber of gear stages: 3
Continuous torque up to: 1.1 Nm
Intermittent torque up to: 1.45 Nm
Reduction ratio: 108
Diameter: 22 mm
Length (without motor): 32.5 mm
Advantages- Compact length for space‑limited installations
- High continuous torque for sustained loads
- Robust for intermittent or impulsive duty cycles
- High intermittent input speed up to 20,000 min-1
- Reduced backlash for accurate positioning
- Multiple reduction ratios available
- Wide range of motor combinations
- Numerous standard options for configuration
Product properties (selection)Number of gear stages: 3
Reduction ratio: 108
Continuous torque, max.: 1.1 Nm
Intermittent torque, max.: 1.45 Nm
Peak torque: 3 Nm
Continuous input speed, max.: 15000 min⁻¹
Intermittent input speed, max.: 20000 min⁻¹
Continuous output power, max.: 8 W
Intermittent output power, max.: 12 W
Efficiency, max.: 78 %
Input inertia with pinion, max.: 21 gmm²
Torsional stiffness, typical: 4 Nm/°
Backlash, no-load, typical: 0.8 °
Length without motor L2: 32.5 mm
Mass without motor, approx.: 70 g
Operating temperature range: -30 ... 110 °C
Direction of rotation, drive to output: =
Housing material: stainless steel
Geartrain material: plastic / stainless steel
NotesThis product belongs to the 22GPT LN planetary gearheads family. Multiple reduction‑ratio variants and motor combinations are available; variant‑specific values (torque, length, mass, etc.) vary by reduction ratio and number of stages.
Technical specifications- Series: 22GPT LN
- Diameter (Ø): 22 mm
- Example reduction ratio (variant shown): 108:1
- Available ratios: 14 ... 1294
- Number of gear stages (example): 3
- Length without motor (example) L2: 32.5 mm
- Continuous torque (example variant): 1.1 Nm
- Continuous torque (series) up to: 1.6 Nm (depending on variant)
- Peak torque examples: up to 3 Nm (depending on configuration)
- Max continuous input speed: 15000 min⁻¹
- Max intermittent input speed: 20000 min⁻¹
- Efficiency, max.: 78 %
- Backlash (no-load, typical): 0.8 °
- Torsional stiffness (typical): 4 Nm/°
- Mass without motor (approx.): 70 g