Planetary gearhead 32GPT HT 198:1
coaxialsolid-shaft10 - 20 Nm

Planetary gearhead - 32GPT HT 198:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 10 - 20 Nm
Planetary gearhead - 32GPT HT 198:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 10 - 20 Nm
Planetary gearhead - 32GPT HT 198:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 10 - 20 Nm - image - 2
Planetary gearhead - 32GPT HT 198:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 10 - 20 Nm - image - 3
Add to favorites
Compare this product

Characteristics

Type
planetary
Shaft orientation
coaxial
Shaft configuration
solid-shaft
Torque
10 - 20 Nm
Number of stages
four-stage
Performance
high-torque, low-backlash, high-speed, high-rigidity
Other characteristics
stainless steel
Rotational speed

Max.: 10,500 rpm
(65,973.4457 rad.min-1)

Min.: 0 rpm
(0 rad.min-1)

Power

12 W, 15 W
(0.02 hp, 0.02 hp)

Backlash

0.6 °

Gear ratio

198 unit

Weight

271 g
(9.56 oz)

Description

Product overview
FAULHABER planetary gearhead 32GPT HT designed for high continuous and intermittent torque applications. Diameter: 32 mm; reduction ratio variant shown: 198:1; continuous torque up to 10 Nm; robust for high radial and axial loads.

Key Features
Number of gear stages: 4
Reduction ratio: 198 (example variant)
Continuous torque (max): 10 Nm
Intermittent torque (max): 12 Nm
Length without motor L2: 57.7 mm

Advantages
  • High continuous and intermittent torque
  • Robust for intermittent or impulsive cycles
  • High intermittent input speed up to 10,500 min-1
  • High radial and axial shaft load capacity
  • Reduced backlash and good torsional stiffness
  • Wide range of reduction ratios and motor combinations


Product properties / Values
Number of gear stages: 4
Reduction ratio: 198
Continuous torque, max.: 10 Nm
Intermittent torque, max.: 12 Nm
Peak torque: 18 Nm
Continuous input speed, max.: 7000 min⁻¹
Intermittent input speed, max.: 9000 min⁻¹
Continuous output power, max.: 12 W
Intermittent output power, max.: 15 W
Efficiency, max.: 72 %
Input inertia with pinion, max.: 193 gmm²
Torsional stiffness, typical: 25 Nm/°
Backlash, at no-load, typical: 0.6 °
Length without motor L2: 57.7 mm
Mass without motor, ca.: 271 g
Operating temperature range: -30 ... 120 °C
Direction of rotation, drive to output: =
Housing material: stainless steel
Geartrain material: stainless steel

Technical specifications
  • Series / Model: 32GPT HT
  • Diameter (Ø): 32 mm
  • Number of gear stages: 4
  • Available reduction ratios (examples): 45:1 up to 1216:1 (product variant shown: 198:1)
  • Continuous torque (max): 10 Nm
  • Intermittent torque (max): 12 Nm
  • Peak torque: 18 Nm
  • Continuous input speed (max): 7000 min-1
  • Intermittent input speed (max): 9000 min-1
  • Continuous output power (max): 12 W
  • Intermittent output power (max): 15 W
  • Efficiency (max): 72 %
  • Backlash (no-load, typical): 0.6 °
  • Torsional stiffness (typical): 25 Nm/°
  • Input inertia with pinion (max): 193 gmm²
  • Length without motor (L2): 57.7 mm
  • Mass without motor: ~271 g
  • Operating temperature range: -30 to 120 °C
  • Housing material: stainless steel
  • Geartrain material: stainless steel

Catalogs

No catalogs are available for this product.

See all of FAULHABER Drive Systems‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

SPS 2026
SPS 2026

24-26 Nov 2026 Nuremberg (Germany) Hall 4 - Stand 346

  • More information

    Other FAULHABER Drive Systems products

    Precision Gearheads

    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
    About DirectIndustry
    DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.