Product overviewPlanetary gearhead Series 32GPT LN. Low Noise (up to -10 dB). Series diameter 32 mm. Available in many reduction ratios and motor combinations. This page describes the 32GPT LN 89:1 variant (reduction ratio 89:1).
Key FeaturesNumber of gear stages: 3
Torque up to: 4 Nm (continuous)
Intermittent torque up to: 5.2 Nm
Reduction ratio: 89
Diameter: 32 mm
Length: 43.1 mm
Advantages- Compact length
- High continuous torque
- Very robust for intermittent or impulsive cycles
- High intermittent speed up to 20,000 min-1
- Reduced backlash
- Many reduction ratios
- Large selection of motor combinations
- Many standard options
Detailed product propertiesNumber of gear stages: 3
Reduction ratio: 89
Continuous torque, max.: 4 Nm
Intermittent torque, max.: 5.2 Nm
Peak torque: 9 Nm
Continuous input speed, max.: 11000 min⁻¹
Intermittent input speed, max.: 14000 min⁻¹
Continuous output power, max.: 14 W
Intermittent output power, max.: 20 W
Efficiency, max.: 82 %
Input inertia with pinion, max.: 125 gmm²
Torsional stiffness, typical: 14 Nm/°
Backlash, at no-load, typical: 0.6 °
Length without motor L2: 43.1 mm
Mass without motor, ca.: 194 g
Operating temperature range: -30 ... 110 °C
Direction of rotation, drive to output: =
Housing material: stainless steel
Geartrain material: plastic/stainless steel
Characteristics / technical specifications- Number of gear stages: 3
- Reduction ratio (example for this variant): 89
- Diameter: 32 mm
- Length without motor (L2): 43.1 mm
- Continuous torque (max): 4 Nm
- Intermittent torque (max): 5.2 Nm
- Peak torque: 9 Nm
- Continuous input speed (max): 11000 min⁻¹
- Intermittent input speed (max): 14000 min⁻¹
- Continuous output power (max): 14 W
- Intermittent output power (max): 20 W
- Efficiency (max): 82 %
- Input inertia with pinion (max): 125 gmm²
- Torsional stiffness (typical): 14 Nm/°
- Backlash at no-load (typical): 0.6 °
- Mass without motor (approx.): 194 g
- Operating temperature range: -30 ... 110 °C
- Housing material: stainless steel
- Geartrain material: plastic / stainless steel