Planetary gearhead 22GPT HT 163:1
coaxialsolid-shaft1 - 5 Nm

Planetary gearhead - 22GPT HT 163:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 1 - 5 Nm
Planetary gearhead - 22GPT HT 163:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 1 - 5 Nm
Planetary gearhead - 22GPT HT 163:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 1 - 5 Nm - image - 2
Planetary gearhead - 22GPT HT 163:1 - FAULHABER Drive Systems - coaxial / solid-shaft / 1 - 5 Nm - image - 3
Add to favorites
Compare this product

Characteristics

Type
planetary
Shaft orientation
coaxial
Shaft configuration
solid-shaft
Torque
1 - 5 Nm, 10 - 20 Nm
Number of stages
four-stage
Performance
high-torque, low-backlash, high-speed, high load capacity
Other characteristics
stainless steel
Rotational speed

9,000 rpm, 10,500 rpm
(56,548.6678 rad.min-1, 65,973.4457 rad.min-1)

Power

7 W, 10 W
(0.01 hp, 0.01 hp)

Backlash

0.8 °

Gear ratio

163 unit

Weight

109 g
(3.84 oz)

Description

Product
FAULHABER 22GPT HT planetary gearhead (High Torque series). Nominal diameter 22 mm. Variant shown: reduction ratio 163:1. Designed for applications requiring high continuous and intermittent torque and high radial/axial shaft loads.

Key Features (summary)
Number of gear stages: 4
Torque (continuous, max): 3.7 Nm
Intermittent torque (max): 5 Nm
Reduction ratio: 163:1 (example variant)
Diameter: 22 mm
Length without motor (L2): 43.6 mm

Ordering note
This product is supplied only as part of a combination with a motor. Availability: available. Delivery time: on request.

Advantages
  • High continuous and intermittent torque
  • Robust for intermittent or impulsive duty cycles
  • High intermittent input speed up to 10,500 min-1
  • High radial and axial shaft load capacity
  • Reduced backlash
  • Wide range of reduction ratios
  • Extensive selection of motor combinations
  • Many standard options available

Technical specifications
  • Number of gear stages: 4
  • Reduction ratio (example variant): 163:1 (ratios available from 45:1 to 1216:1)
  • Continuous torque, max.: 3.7 Nm
  • Intermittent torque, max.: 5 Nm
  • Peak torque: 14 Nm
  • Continuous input speed, max.: 9000 min-1
  • Intermittent input speed, max.: 10500 min-1
  • Continuous output power, max.: 7 W
  • Intermittent output power, max.: 10 W
  • Efficiency, max.: 63 %
  • Input inertia with pinion, max.: 39 gmm²
  • Torsional stiffness, typical: 5 Nm/°
  • Backlash, no-load, typical: 0.8 °
  • Length without motor L2: 43.6 mm (variant-dependent)
  • Mass without motor, approx.: 109 g
  • Operating temperature range: -30 ... 120 °C
  • Housing material: stainless steel
  • Geartrain material: stainless steel

Catalogs

No catalogs are available for this product.

See all of FAULHABER Drive Systems‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

SPS 2026
SPS 2026

24-26 Nov 2026 Nuremberg (Germany) Hall 4 - Stand 346

  • More information

    Other FAULHABER Drive Systems products

    Precision Gearheads

    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
    About DirectIndustry
    DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.