OverviewFAULHABER 32GPT HT planetary gearhead offering high continuous and intermittent torque for industrial applications with impulsive or intermittent loads. Diameter 32 mm. Available reduction ratios from 45:1 up to 1216:1. Continuous torque up to 10 Nm and intermittent torque up to 12 Nm; reduced backlash and high radial/axial load capacity make it suitable for precision drives.
Key features (selected variant 163:1)- Number of gear stages: 4
- Reduction ratio (shown): 163:1
- Diameter: 32 mm
- Length without motor (L2): 57.7 mm
- Continuous torque, max.: 10 Nm
- Intermittent torque, max.: 12 Nm
Advantages- High continuous and intermittent torque capacity
- Designed for intermittent or impulsive duty cycles
- High permissible intermittent input speed up to 10,500 min-1
- High radial and axial shaft load capability
- Reduced backlash for improved positioning
- Wide range of available reduction ratios
- Extensive selection of motor combinations
- Multiple standard options and accessories
Product properties- Number of gear stages: 4
- Reduction ratio: 163
- Continuous torque, max.: 10 Nm
- Intermittent torque, max.: 12 Nm
- Peak torque: 18 Nm
- Continuous input speed, max.: 7000 min-1
- Intermittent input speed, max.: 9000 min-1
- Continuous output power, max.: 12 W
- Intermittent output power, max.: 15 W
- Efficiency, max.: 72 %
- Input inertia with pinion, max.: 193 gmm²
- Torsional stiffness, typical: 25 Nm/°
- Backlash, at no-load, typical: 0.6 °
- Length without motor L2: 57.7 mm
- Mass without motor, approx.: 271 g
- Operating temperature range: -30 ... 120 °C
- Housing material: stainless steel
- Geartrain material: stainless steel
Configurations and variantsMultiple reduction ratios and motor/gearhead combinations are available (examples: 45:1, 50:1, 73:1, 99:1, 126:1, 135:1, 145:1, 163:1, 184:1, 198:1, 220:1, 266:1, 330:1, 419:1, 484:1, 614:1, 653:1, 829:1, 958:1, 1216:1). Lengths and mechanical interfaces vary by variant; consult dimensional drawings and combination tables for integration.
Materials and constructionHousing and geartrain manufactured in stainless steel. Assembly and internal geometry optimized for torsional stiffness, minimal backlash and high radial/axial load resistance. Available with multiple standard interface options and variants for motor mounting.