OverviewPlanetary gearhead Series 22GPT LN with low-noise design (up to -10 dB). Designed for a 22 mm diameter and compact drive assemblies where reduced backlash, high torque density and multiple reduction ratios are required. Supplied as part of motor-gearhead combinations.
Key features- Number of gear stages: 3
- Reduction ratio (example on this sheet): 72:1
- Continuous torque, max.: 1.1 Nm
- Intermittent torque, max.: 1.45 Nm
- Diameter: 22 mm
- Length without motor (L2): 32.5 mm
Advantages- Compact overall length for tight installations
- High continuous torque for sustained operation
- Robust design for intermittent or impulse cycles
- High intermittent input speed up to 20,000 min⁻¹
- Reduced backlash (typ. 0.8°)
- Wide range of reduction ratios
- Large selection of motor combinations and standard options
Technical specifications- Number of gear stages: 3
- Reduction ratio (example): 72
- Continuous torque, max.: 1.1 Nm
- Intermittent torque, max.: 1.45 Nm
- Peak torque: 3 Nm
- Continuous input speed, max.: 15000 min⁻¹
- Intermittent input speed, max.: 20000 min⁻¹
- Continuous output power, max.: 8 W
- Intermittent output power, max.: 12 W
- Efficiency, max.: 78 %
- Input inertia with pinion, max.: 21 gmm²
- Torsional stiffness, typical: 4 Nm/°
- Backlash at no-load, typical: 0.8 °
- Length without motor (L2): 32.5 mm
- Mass without motor, approx.: 70 g
- Operating temperature range: -30 ... 110 °C
- Direction of rotation (drive to output): = (as shown)
- Housing material: stainless steel
- Geartrain material: plastic / stainless steel