Commercial and Residential Solutions - Emerson valves

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

Pressure: 10 bar - 500 bar

max. operating pressure 500 bar, min. operating pressure 10 bar. Type of actuation: manual Application: For single acting cylinders. CETOP 3 adaptation.

Pressure: 400 bar

Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve shuts the ...

DN: 6 mm

The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C

... nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 50 °C

... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...

DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: -10 °C - 50 °C

... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...

DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C

Features of Double Acting Angle Seat Valve Can Be Easily Converted From Nc To No and From double Acting To Single Acting. Operator Having Threaded Ports Is Ideally Suited For Area In Which Contamination Due To Exhaust ...

DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...

Pressure: 0 bar - 36 bar
Temperature: -40 °C - 125 °C

For air purging in system like DPF system, SCR system and also can be used as ON/OFF valve for controlling gaseous media.

DN: 50 mm - 150 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...

DN: 50 mm - 500 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...

Bypass valve with pressure regulator valve, can be utilized in applications where the pump is operating constantly.

DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min

Circuit selector valve, manual operation maximum pressure

DN: 0.5, 0.75, 1 in
Pressure: 500, 350, 400 bar
Temperature: -20 °C - 125 °C

Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options.

DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C

... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW CONTROL VALVES ...

DN: 4, 6, 8 mm
Pressure: 10 bar
Temperature: -5 °C - 50 °C

QUICK EXHAUST VALVE ► For higher piston speeds for cylinders ► To bring about quick-action ventilation, the valve must be installed as close to the cylinder's air connection as possible

DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...