- Hydraulics - Pneumatics >
- Valve >
- Valve >
- PNEUMAX
PNEUMAX valves
DN: 0.25 in - 8 in
Pressure: 45, 180 bar
Temperature: 140 °C
Ball valve - 1/4" - TF VABS 1/4 The TF-VABS ball valves have been exclusively designed and manufactured for refrigerating systems operating with all refrigerant fluids (except NH³).
DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C
... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve ...
PIETRO FIORENTINI
DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C
... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC ...
PIETRO FIORENTINI
DN: 2 in - 24 in
... Shut Down Valve) and HIPPS (High Integrity Pipeline Protection System) systems. Fields of application: • Natural gas industry; • Energy; • Petrolchemical industry; • Water transport. Deltaflux valves ...
PIETRO FIORENTINI
DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
AVS Römer
DN: 2.5 mm
Pressure: 3 bar - 10 bar
Temperature: 0 °C - 140 °C
AVS Römer pressure relief valves are used for protection in closed circuits. When the set response pressure is exceeded, the valve opens and discharges the fluid.
AVS Römer
DN: 4 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 140 °C
... anti-vacuum membrane solenoid valve and relief valve regulates negative pressure via an anti-vacuum membrane, with a relief valve opening in the event of overpressure and relieving upward ...
AVS Römer
DN: 12 mm
Pressure: 0 bar - 40 bar
Temperature: 1 °C - 60 °C
Unblockable motorised ball valve drain The TEC-44 is a powerful timer controlled motorised ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. The ...
DN: 10 mm - 50 mm
Pressure: 10 bar - 30 bar
Temperature: -10 °C - 120 °C
Full bore / PN25 to PN40 (depending on size) Brass valve, FPM O’Ring, PTFE seats BSP threaded end connection Fluid temperature : -20°C +110°C** Working pressure: DN8 to DN32 = 40 Bar* DN40 to DN50 = 25 Bar* Actuator ...
VALPES
DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C
The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...
EFSVALVES
DN: 50 mm - 250 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C
The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...
EFSVALVES
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges.
EFSVALVES
Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure differences than ...
Welland & Tuxhorn AG
Circulation control valve Tasks Circulation control valves regulate the flow rate during drum circulation on forced-flow steam generators. Versions Forged valves in straight, angled ...
Welland & Tuxhorn AG
Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount of cooling water to the point of use. The pressure ...
Welland & Tuxhorn AG
DN: 10 mm
Pressure: 320 bar
Flow rate: 400 l/min
3/2-way valve cartridge for electric, direct and pilot controls applicable. Connection: DN10
Blasberg GmbH
DN: 3 mm
Pressure: 320 bar
Flow rate: 20 l/min
The pilot valve is suitable for applications with permanent pressure. The valve is fitted on the left and right side with a locking lever.
Blasberg GmbH
DN: 10 mm
Pressure: 0 bar - 510 bar
Flow rate: 0 l/min - 400 l/min
The pressure relief valve for connecting the DN10 has a maximum liter capacity of 400 l /min. The operating pressure can be set max.510 bar.
Blasberg GmbH
DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C
Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks to its stability, ...
Metalurgica Zaes S.L.
DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C
Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks to its stability, ...
Metalurgica Zaes S.L.
DN: 0.375, 0.25, 0.5 in
Pressure: 690 bar
Temperature: -200 °C - 500 °C
High pressure systems Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks ...
Metalurgica Zaes S.L.
Pressure: 60 bar - 280 bar
Flow rate: 40 l/min
... - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - 40 mm - Pressure range - 60 - 280 BAR - Flow - Max. 40 l/min
DN: 1.5 in - 4 in
... Opening/closing: by 3W solenoid pilot valve •Applications : For water distribution •To remove operation of hydraulic valve by electric command Description G500-EL model valve ...
BACCARA AUTOMATION
DN: 0.75 in - 2 in
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 50 °C
... & NPT Pressure range0 3 to 10bar Temperature rangeFluid : 5ºC to 50ºC (no freezing) Materials in contact with mediaMain Valve: Reinforced Nylon Diaphragm: NR Seals: Buna – N Spring: Stainless Steel AISI 300 series
BACCARA AUTOMATION
DN: 0.25 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 80 °C
... See table Temperature rangeFluid : 5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain Valve: Brass, Stainless Steel AISI 316 Seals: NBR MediaAir, gas, water, fuel, oil etc
BACCARA AUTOMATION
Dredge Gate Valve FEATURES: The dredge valve is designed in such a way that there are no fasteners inside the body Dredge valve is made of fabricated high tensile steel and cast steel The ...
DN: 50 mm - 3,000 mm
Pressure: 10 bar - 100 bar
Pressure / flow control valves. Main features : ■ significant reduction in turbulence, vibration and noise ■ fine regulation of the entire range of flow, made possible by the customized trim ■ high precision in ...
F. Nencini Srl
DN: 250 mm - 3,400 mm
Pressure: 10 bar - 100 bar
... the flow is controlled by the movement of the sleeve of the valve against the fixed cone. The fixed cone valve discharges the raw water of dams to free air, chamber or underwater level. This valve ...
F. Nencini Srl
DN: 100 mm - 2,200 mm
Pressure: 10 bar - 64 bar
... stilling basin and then into the downstream channel. Nencini also designs and engineers the stilling well related to the valve. Applications ■ hydraulic power plants ■ turbine by-pass ■ controlled discharges.
F. Nencini Srl
Tyco
Pressure: 0 Pa - 2,000 Pa
Temperature: 0 °C - 1,000 °C
As for industrial round valves, square valves are also designed taking into account the pressures and temperatures of use. The industrial square valves do not have a standard dimension, ...
DN: 250 mm - 3,000 mm
The dapò valves are widely used where a regulation of the flow rate or a partialization of the air flows is required. Dapò adjustment valves with diameters from 250 mm up to 3000 mm are possible. For ...
... Rimor manufactures guillotine valves for all those applications where it does not have to be present – with the valve open – no impediment to the flow of fluid eg shavings and so on, this can not be achieved ...
DN: 2, 1.5, 1.25, 1 in
BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped ...
BEULCO GmbH & Co. KG
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... industrial applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an additional back ...
A. u. K. Müller
DN: 2, 3, 1 in
Pressure: 15,000 psi
... premium quality plug valves offering for a wide range of well drilling production&well-servicing applications. Available the range in size1”ro 3”&pressure rating upto 15000psi. Other valve products, such ...
Haimo Technologies Group Corp.
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...
SAMSON
Pressure: 400 bar
Temperature: -20 °C - 90 °C
Flow rate: 250, 180, 400 l/min
The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency. > ...
Kawasaki Precision Machinery
DN: 6 mm - 16 mm
Ventilation elements Air valve, pneumatically activated Air Valve
DN: 0.25 in
Pressure: 630 bar
Temperature: -20 °C - 200 °C
Pressure: 15,000, 10,000 psi
Temperature: -18 °C - 204 °C
... style ball and stem that eliminates the possibility of ,,stem-turnout,, common with other valves designed for similar service. In addition, these specialty ball valves have re-torqueable seat glands that ...
Watts Fluid Air
DN: 100, 150, 125, 200, 160 mm
Description Valve for exhaust air. Designed for wall or ceiling mounting. Bayonet holders connect to socket VRGU, VRGL, or VRGM.
LINDAB
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining