- Hydraulics - Pneumatics >
- Valve >
- Valve >
- Schubert & Salzer
Schubert & Salzer valves
Pressure: 10 bar - 500 bar
max. operating pressure 500 bar, min. operating pressure 10 bar. Type of actuation: manual Application: For single acting cylinders. CETOP 3 adaptation.
Pressure: 400 bar
Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve shuts the ...
DN: 6 mm
The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C
... nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 50 °C
... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: -10 °C - 50 °C
... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...
Praher Plastics Austria GmbH
Temperature: 37 °C - 41 °C
Model SP157A is a scald protection bleed valve. Recommended for high ambient temperature locations where extreme heat or hot sun might cause internal water overheating. Flushes water through line when internal water temperature ...
Haws AG - Headquarters for Europe, Middle East and
DN: 32, 25, 63, 40, 20 mm
OMI Officine Meccaniche Industriali
DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C
Features of Double Acting Angle Seat Valve Can Be Easily Converted From Nc To No and From double Acting To Single Acting. Operator Having Threaded Ports Is Ideally Suited For Area In Which Contamination Due To Exhaust ...
Rotex Automation Limited
DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...
Rotex Automation Limited
Pressure: 0 bar - 36 bar
Temperature: -40 °C - 125 °C
For air purging in system like DPF system, SCR system and also can be used as ON/OFF valve for controlling gaseous media.
Rotex Automation Limited
DN: 50 mm - 150 mm
Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...
DN: 50 mm - 500 mm
Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...
Bypass valve with pressure regulator valve, can be utilized in applications where the pump is operating constantly.
BEZARES S.A.
DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min
Circuit selector valve, manual operation maximum pressure
BEZARES S.A.
DN: 0.5, 0.75, 1 in
Pressure: 500, 350, 400 bar
Temperature: -20 °C - 125 °C
Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options.
BEZARES S.A.
DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C
... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW CONTROL VALVES ...
DN: 4, 6, 8 mm
Pressure: 10 bar
Temperature: -5 °C - 50 °C
QUICK EXHAUST VALVE ► For higher piston speeds for cylinders ► To bring about quick-action ventilation, the valve must be installed as close to the cylinder's air connection as possible
DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
DN: 0.25 in - 1 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,200 °F
... Tantalum, and other exotics with various trim sizes for every valve measure and incorporate an exact precise control. It is available in globe, angle, 3-way, sanitary, and cryogenic designs. This valve ...
Badger Meter
DN: 6 mm - 63 mm
Pressure: 350 bar
... provide an extensive range of male and female standard and super Staple-Lock ball valves with swivel females and the cost effective compact fixed female option. Ball valves are supplied with various handle ...
DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C
... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve ...
AIRTEC Pneumatic
DN: 25 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 450 °C
... Neles® series E ball control valves are designed to meet the most severe erosive service requirements of wide range of industrial applications in pulp & paper, petro-chemical, refining and related industries. E series ...
Metso Automation
DN: 50 mm - 600 mm
Pressure: 0 bar - 10.3 bar
Temperature: -40 °C - 175 °C
... with the disc during valve opening and closing, there is minimal disc impingement. This is in contrast to conventional butterfly valves where disc impingement leads to shaving of the seat, decreasing ...
Posi-flate
DN: 15 mm - 100 mm
Pressure: 160 bar
Nominal diameter DN 15...100. Nominal pressure PN 16...160. Two-way and three-way design Valve body materials GJL250 GJS400-18-LT GP240GH GX5CrNiMo19-11-2 G17CrMo5-5 On-off cone, parabolic cone, perforated cone, V-port ...
RTK Regeltechnik Kornwestheim
DN: 4 mm
Pressure: 0 bar - 250 bar
Temperature: -25 °C - 80 °C
Unloading Valves, Hydraulically ControlledDescriptionSeries DWPB-4N… cartridges are size 4, two stage, high performance pressure-unloading valves with an 3/4-16 UNF mounting thread. They consist of a ...
BUCHER Hydraulics
DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C
Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...
Airwork Pneumatic Equipment
DN: 0.125 in - 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 60 °C
The selective valve is mainly used to guide or control two different inputs which either chooses one or another but uses only a single a way out.
Airwork Pneumatic Equipment
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
The quick exhaust valve allows to exhaust the air in the cylinder to increase the speed. We suggest the mounting directly on the cylinder’s supply
Airwork Pneumatic Equipment
DN: 0.25 in - 2 in
Pressure: 64 bar
Housing and ball made of 1.4408. Sealing material: PTFE / FKM.
Schwer Fittings
DN: 15 mm - 100 mm
Pressure: 16, 40 bar
Temperature: 0 °C - 200 °C
... 1-F1 Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. Maximum operating temperature 200 ° C. Ball valves with flange connection for PN 40 on request. We reserve the right to alter dimensions.
Schwer Fittings
DN: 8 mm - 80 mm
Pressure: 64 bar
Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.
Schwer Fittings
DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C
YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL CHARACTERISTICS Temperature-20°-120°C Fluidair, ...
UNIVER Group
Pressure: 210 bar
Flow rate: 20 l/min
The Leak Free Solenoid Valve is specifically designed to provide a good quality performance and functionality. It is built with a sub-plate or screw-in, two-way, poppet style normally used to cut off the hydraulic power. ...
ATOS
DN: 160 mm - 1,000 mm
Pressure: 1, 0.9 bar
Temperature: -20 °C - 70 °C
Explosion Isolation Flap Valve CARZ - protective system. Explosion Isolation Flap Valve type CARZ is design as explosion pressure resistance equipment, which is able to prevent a transmission of dangerous ...
DN: 100 mm - 160 mm
The PV5G/PV5 Series ISO valves are pilot operated type 5-port valves in compliance with the ISO standards which regulate international valve mounting dimensions.Suitable for operating ...
CKD
DN: 5 mm - 12 mm
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 70 °C
Valves series “CA” are produced in the 3/2, 3/3, 5/2 and 5/3 pneumatic functions. The poppet kind of construction and the very rugged control allow the valve to stand high stress. The push-botton and ...
Waircom
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...
Tecnidro
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining