- Materials - Tools - Components
- Standard Mechanical Component
- Wiper seal
- ULMAN Dichtungstechnik GmbH
- Products
- Catalogs
- News & Trends
- Exhibitions
Scraper seal A8elastomerNBRpolyurethane
Add to favorites
Compare this product
Characteristics
- Type
- scraper
- Material
- polyurethane, elastomer, NBR, FKM
- Configuration
- circular
- Fluid
- oil, air, for compressed air
- Other characteristics
- hydraulic, dynamic, single-acting, pneumatic, high-temperature, abrasion-resistant
- Temperature limit
Min.: -40 °C
(-40 °F)Max.: 200 °C
(392 °F)- Shore A hardness
Min.: 90 unit
Max.: 95 unit
- Speed
Min.: 0 m/s
(0 ft/s)Max.: 1 m/s
(3.3 ft/s)
Description
Product overview
The Scraper A8 is a one-piece wiper designed for rod protection and sealing edge wiping. It is available in NBR, FKM or polyurethane (TPU) and incorporates an additional outer-diameter step to ensure a tighter fit and improved wiping effect.
Materials and suitability
Field of application
Main use
Designed for wiping and contaminant exclusion on hydraulic and pneumatic cylinder rods to protect internal seals and extend component life.
Materials
Elastomers and polyurethane (TPU).
Technical values
Materials: NBR / FKM / TPU
Variant NBR: Temperature: -40°C to +100°C (material dependent) — Speed: up to 1 m/s — Pressure: not specified
Variant FKM: Temperature: -20°C to +200°C (material dependent) — Speed: up to 1 m/s — Pressure: not specified
Variant TPU: Temperature: -40°C to +100°C (material dependent) — Speed: up to 1 m/s — Pressure: not specified
Note: Maximum values of temperature, speed and pressure are not simultaneously applicable. Values vary depending on material and media.
Characteristics / technical specifications
The Scraper A8 is a one-piece wiper designed for rod protection and sealing edge wiping. It is available in NBR, FKM or polyurethane (TPU) and incorporates an additional outer-diameter step to ensure a tighter fit and improved wiping effect.
Materials and suitability
- NBR: suitable for hydraulic and pneumatic applications
- FKM: for environments requiring higher chemical and temperature resistance
- TPU: for mobile hydraulic applications with heavy contamination due to excellent abrasion resistance
Field of application
- Static and dynamic sealing
- Single-acting and double-acting cylinders
- Linear motion
- Rotating shafts (inactive)
- Oscillating motion
Main use
Designed for wiping and contaminant exclusion on hydraulic and pneumatic cylinder rods to protect internal seals and extend component life.
Materials
Elastomers and polyurethane (TPU).
Technical values
Materials: NBR / FKM / TPU
Variant NBR: Temperature: -40°C to +100°C (material dependent) — Speed: up to 1 m/s — Pressure: not specified
Variant FKM: Temperature: -20°C to +200°C (material dependent) — Speed: up to 1 m/s — Pressure: not specified
Variant TPU: Temperature: -40°C to +100°C (material dependent) — Speed: up to 1 m/s — Pressure: not specified
Note: Maximum values of temperature, speed and pressure are not simultaneously applicable. Values vary depending on material and media.
Characteristics / technical specifications
- One-piece wiper design
- Available materials: NBR, FKM, TPU
- Hardness depending on compound: 90–95 Shore A
- Additional outer-diameter step for improved tight fit and wiping effect
- Suitable for hydraulic and pneumatic cylinder applications
- Temperature ranges (material dependent): NBR -40°C to +100°C; FKM -20°C to +200°C; TPU -40°C to +100°C
- Maximum speed up to 1 m/s (material dependent)
Catalogs
Exhibitions
Meet this supplier at the following exhibition(s):
Other ULMAN Dichtungstechnik GmbH products
Dynamic Seals
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.