- Hydraulics - Pneumatics >
- Pump >
- Pump >
- Agilent
Agilent pumps
Flow: 0 m³/h - 1,000 m³/h
Power: 1.3 kW - 310 kW
... Excellent flow passing properties Motors with high power density Robust and reliable COMPACT CHOPPER PUMPS CUT SUMP PROBLEMS DOWN TO SIZE The Flygt F 3069 chopper pump is specifically ...
FLYGT
Flow: 57 l/min
Pressure: 10 bar
... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout ...
Wilhelmsen
The hand pump is a simple and cost effective method of moving small and medium quantities of liquid from a 200 L barrel, 60 L drum or a 25 L pail (requires an adapter). The pump is ...
Wilhelmsen
Flow: 189 l/min
Pressure: 1.4 bar - 8.6 bar
Head: 8.8 m
The polypropylene diaphragm pump is built with the highest quality precision parts. Long lasting even when used with abrasive fluids, making this product very cost effective. Professionals turn to this pump ...
Wilhelmsen
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...
Zaklady Automatyki POLNA S.A.
Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
... mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump is balanced by the optimally designed sealing ring and balance hole, the paired tapered ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
Single-stage radial impeller, horizontal, radially split volute, foot mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. Dimensions and performance meet and exceed ISO2858 requirements. ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1.45 m³/h - 163 m³/h
Pressure: 9 bar - 80 bar
Fluid temperature: 85 °C - 130 °C
... contactless running of the pump elements in rotary lobe pumps opens up important perspectives: On one hand it is perfect for hygienic applications due to the complete elimination of abrasion ...
Flow: 1.4 m³/h - 60 m³/h
Pressure: 8 bar - 15 bar
Fluid temperature: 85 °C - 130 °C
... sweets iLOBE with integrated heat exchanger Small Premium Edition As an evolution of the conventional rotary lobe pump LC the iLOBE is equipped with an integrated heat exchanger ...
Flow: 72 l/h - 2,200 l/h
Pressure: 0 bar - 8 bar
Fluid temperature: 85 °C - 130 °C
... flexible handling by means of lifting bows. Discharge pumps for Fluidbag and barrels A specialty of ipp Pump Products GmbH is the progressive cavity pump FLB, which as a horizontal ...
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm
Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and ...
Output diameter: 60.3 mm - 88.9 mm
... -salt pump, through bridge pump, deflecting well pump, anti-powdered coal pump and so on special well oil pump. Technical Features 1. The pump ...
Flow: 50 l/min
Pressure: 360 mbar
• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers
Power: 20 W - 400 W
• Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive pumps ...
Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C
Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox ...
Annovi Reverberi
Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W
... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...
Dr. Jessberger GmbH
Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W
... as the urea solution AdBlue®*. This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin fluid and slightly viscous, neutral, ...
Dr. Jessberger GmbH
Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W
The drum pump motor JP-164 is a compactly built, not explosion-proof, internally ventilated universal motor, that has proven itself for slightly viscous media as diesel in agricultural field and at fire brigades foaming ...
Dr. Jessberger GmbH
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...
Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W
... pressure strokes. Solenoid diaphragm pumps consists of the follwowing (main) components: Drive housing with solenoid Elektronics with connection on the control panel Built-in pump ...
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...
The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance which well meet the lifting ...
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...
Hayward Tyler®
Flow: 0 us gal/min - 3,000 us gal/min
Head: 0'00" ft - 500'00"
... Hayward Tyler End Suction Pumps are ideal for the following applications: Safeguard Pumps ASME Section III Class 2 Seal water injection pumps Decay heat pumps ...
Hayward Tyler®
Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m
Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type provides a different head-capacity ...
Hayward Tyler®
Flow: 15 m³/h - 18 m³/h
... varies depending on the type of auger pump installed. The 7515 up to a maximum grain size of 8 mm conveys up to 15m3/h. With the 2L8 auger pump (up to 12 mm grain size) speeds of up to 18m3/h can be reached.The ...
Flow: 4 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
SID Société Industrielle de la Doux SA
Flow: 8 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
SID Société Industrielle de la Doux SA
Flow: 15 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
SID Société Industrielle de la Doux SA
• Flow rates and prevalence on request • Made of PP or PVDF
CAODURO impianti S.r.l.
• Flow rates and prevalence on request • Made of PP or PVDF • Filter chambers with discs, cartridges, wires, bags
CAODURO impianti S.r.l.
• For applications inside or outside the tank • Made of plastic: PP – PVC • Shaft made of: AISI316 – coated titanium
CAODURO impianti S.r.l.
... any leakage. These pumps should always be used together with a primary pump increasing the total flow rate at low operating pressures and reaching a great improvement of the final pressure. Typical ...
DAB Technology Pte. Ltd.
Power: 0 kW - 11 kW
CENTRIFUGAL PUMP (SHB) ASV Stubbe produces pumps for aggressive or corrosive liquids. We offer an extensive product range of horizontal or vertical pumps made of the most resistant materials ...
DAB Technology Pte. Ltd.
Power: 0 kW - 0.37 kW
ECCENTRIC PUMP (F) ASV Stubbe produces pumps for aggressive or corrosive liquids. We offer an extensive product range of horizontal or vertical pumps made of the most resistant materials ...
DAB Technology Pte. Ltd.
Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...
Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...
Flow: 1 m³/h - 10 m³/h
Pressure: 12 bar
Power: 1.5 kW - 5.5 kW
Piston Pump - "Libra" Series from 1 to 10 mc/h Pressure up to 15 bar Many materials configuration For pressure transfer of viscous liquid For sludge feeding of Filterpress For chemical Industry, metal finishing ...
Flow: 249.88 m³/h - 931.21 m³/h
Pressure: 175 psi
... the Cornell frame will let you know it is Cornell pump. W, Y, R, & H Series Pumps Clear-Water-4HHCornell clear liquid centrifugal pumps are found in many agricultural irrigation applications.These ...
Cornell Pump
Flow: 4.54 m³/h - 36.3 m³/h
Head: 80'00", 130'00"
Edge End Gun Booster Pumps 2C-Corrections-ClippedCornell’s EDGE™ End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End ...
Cornell Pump
Flow: 68.1 m³/h - 823.3 m³/h
Pressure: 175 psi
Cyclone Vertical Turbine Pumps Cornell Pump’s VT pump series (Cyclone) relies on our demonstrated superior hydraulics, in a submerged design. The proven quality of Cornell RB series ...
Cornell Pump
Flow: 0 l/h - 0.06 l/h
... to 1500 mL/hr (60 mL syringe) Pumps continuously until you stop the pump Infusion rate can be changed while pumping Syringe purge mode Power failure mode allows pump ...
New Era Pump Systems, Inc.
Flow: 0 l/h - 0.0021 l/h
... Download Brochure Download User Manual Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump Using 2 NE-1000 pumps attached with a cable, one pump ...
New Era Pump Systems, Inc.
Flow: 0 l/h - 7.515 l/h
... User Manual Available in Microfluidics (NE-4002X) and OEM (NE-4500) versions Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump Using 2 NE-4000 pumps attached ...
New Era Pump Systems, Inc.
Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm
The full-flow pumps of the TF series for wells produced by DIMACO S.a.s., make it possible to operate without need to external controls or sensors. The pumps are in fact able to check inside the fluid ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining