- Hydraulics - Pneumatics >
- Pump >
- Pump >
- Metso
Metso pumps
Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm
Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and ...
Output diameter: 60.3 mm - 88.9 mm
... -salt pump, through bridge pump, deflecting well pump, anti-powdered coal pump and so on special well oil pump. Technical Features 1. The pump ...
Flow: 50 l/min
Pressure: 360 mbar
• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers
Sisme Spa
Power: 20 W - 400 W
• Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive pumps ...
Sisme Spa
Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C
Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox ...
Annovi Reverberi
Flow: 80 l/min - 660 l/min
Pressure: 20 bar - 25 bar
Power: 30, 7.5, 4, 22.5, 15 kW
... Dosanova offers a variety of efficient pumps e.g. for: wash-down systems, CIP systems, trolley washers,... The thoroughly tested range is built on more than 60 years of experience and includes very compact ...
Dosanova bvba
Flow: 120, 80, 110, 50 l/min
Pressure: 40, 25 bar
Power: 7.5, 4 kW
... as water booster equipped with injector systems. The boosters are equipped with stainless steel (AISI316), frequency pump with Blue Flux best efficiency label. The cabinets have a hygienic finish and a design ...
Dosanova bvba
Pressure: 40 bar
... Dosanova offers a variety of efficient pumps e.g. for: wash-down systems, CIP systems, trolley washers,... The thoroughly tested range is built on more than 60 years of experience and includes very compact ...
Dosanova bvba
Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W
... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...
Dr. Jessberger GmbH
Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W
... as the urea solution AdBlue®*. This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin fluid and slightly viscous, neutral, ...
Dr. Jessberger GmbH
Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W
The drum pump motor JP-164 is a compactly built, not explosion-proof, internally ventilated universal motor, that has proven itself for slightly viscous media as diesel in agricultural field and at fire brigades foaming ...
Dr. Jessberger GmbH
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...
Flow: 0 l/min - 4,656 l/min
Pressure: 0 Pa - 2,000,000 Pa
... function as a process and/or CIP pump, which helps in reducing maintenance time and costs, with the advantage that it is suitable for abrasive products like toothpaste. It can handle air up to 60%, which prevents pump ...
Q-Pumps
Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W
... pressure strokes. Solenoid diaphragm pumps consists of the follwowing (main) components: Drive housing with solenoid Elektronics with connection on the control panel Built-in pump ...
Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW
The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...
M-TEC Mathis Technik
Flow: 3 l/min - 22 l/min
Pressure: 30 bar
Power: 4 kW
The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin ...
M-TEC Mathis Technik
Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW
... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...
M-TEC Mathis Technik
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...
The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance which well meet the lifting ...
Flow: 1 m³/h - 66 m³/h
Head: 3.5 m - 114 m
Power: 0.37 kW - 9.2 kW
... centrifugal pumps; electric motor with extended shaft directly connected to the pump. NM: single-impeller. NMD: with two back-to-back impellers (with axial thrust balancing). Connections : threaded ports ...
Calpeda
Flow: 1 m³/h - 480 m³/h
Head: 3 m - 95 m
Power: 0.25 kW - 75 kW
... -coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 30 kW, new bracket construction for standard motors (stub-shaft construction) from 37 to 75 kW with ...
Calpeda
Flow: 1 m³/h - 480 m³/h
Head: 3 m - 95 m
Power: 0.25 kW - 75 kW
... Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 15 kW, new bracket construction for standard motors (Stub-shaft construction) from 18,5 to 75 kW ...
Calpeda
Flow: 0 m³/h - 120 m³/h
Pressure: 0 bar - 35 bar
The FKL series features circumferential piston pumps designed for special pumping applications. These pumps operate at 35 bar maximum pressure with up to 120 m3/h flow rates. Available in ten different ...
FRISTAM
Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar
When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...
FRISTAM
Based on the proven centrifugal pumps of the Fristam FP range, the shear pump has a new, efficient mixing method. A rotor/stator system which operates at tip speeds of up to 38 m/s is utilized instead ...
FRISTAM
Flow: 15 m³/h - 18 m³/h
... varies depending on the type of auger pump installed. The 7515 up to a maximum grain size of 8 mm conveys up to 15m3/h. With the 2L8 auger pump (up to 12 mm grain size) speeds of up to 18m3/h can be reached.The ...
Flow: 4 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
SID Société Industrielle de la Doux SA
Flow: 8 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
SID Société Industrielle de la Doux SA
Flow: 15 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
SID Société Industrielle de la Doux SA
Flow: 9,000 l/h
Head: 53 m
Power: 2 ch
HANIL Electric Co.,Ltd
Flow: 2,700 l/h
Head: 26 m
Power: 0.8 ch
HANIL Electric Co.,Ltd
Flow: 160 l/h
Head: 30 m
Power: 2 ch
HANIL Electric Co.,Ltd
• Flow rates and prevalence on request • Made of PP or PVDF
CAODURO impianti S.r.l.
• Flow rates and prevalence on request • Made of PP or PVDF • Filter chambers with discs, cartridges, wires, bags
CAODURO impianti S.r.l.
• For applications inside or outside the tank • Made of plastic: PP – PVC • Shaft made of: AISI316 – coated titanium
CAODURO impianti S.r.l.
Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 12 bar
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...
WANGEN Pumpen
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar
... pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit. Benefits and Characteristics ...
WANGEN Pumpen
Flow: 0.02 m³/h - 7 m³/h
Pressure: 20 bar
Fluid temperature: -30 °C - 140 °C
... in the product chamber. Pump disassembly is easily carried out by removing all pump component connections outside the product chamber. Benefits and Characteristics excellent dosing accuracy low dead ...
WANGEN Pumpen
Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...
Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...
Flow: 1 m³/h - 10 m³/h
Pressure: 12 bar
Power: 1.5 kW - 5.5 kW
Piston Pump - "Libra" Series from 1 to 10 mc/h Pressure up to 15 bar Many materials configuration For pressure transfer of viscous liquid For sludge feeding of Filterpress For chemical Industry, metal finishing ...
Flow: 249.88 m³/h - 931.21 m³/h
Pressure: 175 psi
... the Cornell frame will let you know it is Cornell pump. W, Y, R, & H Series Pumps Clear-Water-4HHCornell clear liquid centrifugal pumps are found in many agricultural irrigation applications.These ...
Cornell Pump
Flow: 4.54 m³/h - 36.3 m³/h
Head: 80'00", 130'00"
Edge End Gun Booster Pumps 2C-Corrections-ClippedCornell’s EDGE™ End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End ...
Cornell Pump
Flow: 68.1 m³/h - 823.3 m³/h
Pressure: 175 psi
Cyclone Vertical Turbine Pumps Cornell Pump’s VT pump series (Cyclone) relies on our demonstrated superior hydraulics, in a submerged design. The proven quality of Cornell RB series ...
Cornell Pump
Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm
The full-flow pumps of the TF series for wells produced by DIMACO S.a.s., make it possible to operate without need to external controls or sensors. The pumps are in fact able to check inside the fluid ...
The external gear pump with innovative hygiene concept Dead space free and maintenance free. The rinsing concept ensures maximum hygiene and optimized cleaning cycles. The selected materials guarantee a long service ...
Wilden P200 - 25 mm (1'') Advanced Metal Pump WETTED HOUSINGS (Liquid Chambers and Manifolds) Material Ship Wt Aluminum 11 kg (24 lbs) Ductile Iron 21 kg (47 lbs) 316 S.S. 23 kg (51 lbs) NON-WETTED HOUSINGS Description ...
Wilden Pump
Pressure: 700 bar
• Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • ...
Pressure: 1,000, 1,500, 2,800 bar
... tensioner. • Oil reservoir in aluminum and valve made in steel (AHP705 and UHP2800). • Ergonomic – Easy grip pump lever and relief knob. • The pumps have a 2-step function that automatically switches ...
Pressure: 700 bar
AIR OPERATED HYDRAULIC PUMPS, 700 BAR • Can be operated by hand or foot. • When operating with foot you get both hands free to hold the tool, (nut splitter, puller, cylinder etc) which is a great advantage ...
Flow: 0.239, 0.025 m³/h
Weight: 50 lb
... for those looking for higher performance from a portable pump. High fluid output makes this pump the perfect option for jobs that require fast cycle times. • These lightweight and portable pumps ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining