- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Flow meter >
- Spirax Sarco
Spirax Sarco flow meters
Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 6 bar
Precision: 1 %
FLUX Flow meters, nutating disc type FMC 100, are designed for the use with FLUX drum pumps or for the stationary application e.g. in piping systems. With the evaluation unit FLUXTRONIC® filling and dosing ...
FLUX-GERÄTE GMBH
Volumetric flow rate: 25 l/min - 250 l/min
Process pressure: 6 bar
FLUX flow meters FMC 250, built to the nutating disc principle (FMC), are designed for the stationary use in e.g. piping systems. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost ...
FLUX-GERÄTE GMBH
Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 4 bar
The FLUX flow meter FMJ 100, built according to the nutating disc principle, can be used with FLUX drum pumps e.g. with the evaluation unit FLUXTRONIC® the filled quantity can be displayed. This way ...
FLUX-GERÄTE GMBH
Volumetric flow rate: 0.5 l/min - 20 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 16 bar
The new FLEXI-FLOW™ series combines fast and stable chip sensors with reliable and accurate bypass technology. The compact, innovative instruments are a quantum leap forward in mass flow measurement and ...
Bronkhorst
Volumetric flow rate: 0.1 l/min - 100 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 10, 64, 100 bar
The High Performance MFM / MFC That Adapts To Your Process Intelligent Mass Flow Meters/Controllers EL-FLOW® Prestige, the latest generation thermal mass flow meters ...
Bronkhorst
Volumetric flow rate: 0.1 l/min - 1,670 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 200, 400, 64, 100 bar
Proven Performance in Mass Flow Measurement & Control EL-FLOW® Select Series Mass Flow Meters/Controllers are thermal mass flow meters ...
Bronkhorst
Volumetric flow rate: 0 l/min - 0.1 l/min
Process temperature: 0 °C - 80 °C
Process pressure: 1.1 bar - 3.5 bar
Critical semiconductor manufacturing processes continuously desire precision gas flow control devices that enable both future innovation, and lab to fab transition of leading edge memory and logic device. ...
HORIBA STEC
Mass flow rate: 10 g/h - 27,000 g/h
Process temperature: 0 °C - 65 °C
Process pressure: 10 psi - 200 psi
... measurement and control of very low flow rates of liquid or gas with the new series of Quantim® QMC Coriolis flow meters and controllers from Brooks Instrument. This third-generation ...
Brooks Instrument
Process temperature: 5 °C - 50 °C
Process pressure: 0 bar - 10 bar
Precision: 0.35, 1 %
One device. Multiple gases and flows. Maximum flexibility. Multiple gases in one device equals maximum process flexibility and productivity. The GF40 Series elastomer sealed mass flow controllers and ...
Brooks Instrument
Volumetric flow rate: 0 l/min - 300 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 34.47 bar
... controllers and meters provides. Designed for semiconductor, MOCVD and other gas flow control applications, the GF100 series exceeds the semiconductor industry standard for reliability, ...
Brooks Instrument
Process temperature: -30 °C - 80 °C
... cycle operation for self-sufficient systems Flow metering at the highest technical level The NivuFlow 750 flow meter is the successor to the well-known OCM Pro CF. Compact dimensions ...
NIVUS GmbH
Process temperature: -20 °C - 70 °C
... as in low flow level circumstances -IoT-ready with global 4G connectivity for highest availability and digital services Hybrid Flow Measurement NivuFlow 7550 is a hybrid measurement system ...
NIVUS GmbH
Process temperature: -20 °C - 70 °C
... ambient conditions. The large graphic display permits quick and easy commissioning of the flow meter system. Due to the modular construction of our radar flow meter ...
NIVUS GmbH
Process pressure: 15.5, 34 bar
... solution to natural gas flow metering. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow ...
FCI Fluid Components International
Process temperature: -18 °C - 121 °C
Process pressure: 10, 34 bar
Precision: 1, 0.5, 2 %
... Wastewater treatment aeration control Burner and furnace air flow control HVAC duct/damper control Blower and dryer air flow control Lake, pond and aquaculture aeration Compressed ...
FCI Fluid Components International
Process temperature: -18 °C - 121 °C
Process pressure: 34, 10 bar
Precision: 2, 1, 0.5 %
... compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow ...
FCI Fluid Components International
Volumetric flow rate: 0 l/min - 0.1 l/min
Process temperature: 5 °C - 50 °C
Process pressure: 0 bar - 5 bar
Micro Flow Rate Liquid Flow Meter By combining a thermal MEMS sensor and a highly corrosion-resistant quartz glass flow path, the product can measure micro flow ...
Azbil Europe NV
Volumetric flow rate: 0 l/min - 500 l/min
Process temperature: -20 °C - 70 °C
Process pressure: 15 bar
... performance and high range ability Gas Flow Meters. Description The CMS series of gas mass flow meters employs our proprietary thermal flow rate sensor ...
Azbil Europe NV
Volumetric flow rate: 0.5 m³/h - 170 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 10 bar
The CMG Series of gas flow monitors employs our proprietary thermal flow rate sensor as the sensing element, and measures the fuel flow rate for gas burners. The CMG ...
Azbil Europe NV
... ten samples per second, with some limitation of number of recorded channels). 1.5GB of internal data memory is enough for continuous recording of all channels with a speed of 1 sample per second (each channel) for over ...
The MultiCon CMC-99 is a powerful and versatile compact-multichannel-controller with a capability to record data, if the recording function is requested and activated. Thanks to that it is one of the first industrial devices which integrates ...
As a result of extending the range of functional applications of the MultiCon product line, the CMC-N16 wall mounted model has been designed. The new IP 65 enclosure allows using the device in harsh environments, where safe installation ...
Volumetric flow rate: 1 l/min - 40 l/min
Process temperature: -10 °C - 90 °C
The SDN 552 series by EGE is an Electromagnetic flow meter which is designed for controlling various media. For this specific model, it comes with a digital display making it to suit for a wide range ...
EGE-Elektronik Spezial-Sensoren GmbH
Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 20 bar
... series by EGE is a flow monitor which can control heavy flow up to 100 l/min. This is the compatible model which suit to sensor's expert series that is space efficient and all in one ...
EGE-Elektronik Spezial-Sensoren GmbH
Volumetric flow rate: 6 l/h - 120 l/h
Process temperature: 0 °C - 60 °C
Process pressure: 10 bar
... Terminology » Setting instructions » Inline-Flow monitoring » Use in hazardous areas » Air flow controller compact inline Fluid controllers The thermal flow controllers by EGE ...
EGE-Elektronik Spezial-Sensoren GmbH
Volumetric flow rate: 0 l/min - 300 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 0.2 bar - 2 bar
Built upon proven TSI flow sensor technology, the NEW 5000 Series Flow Multi-Meter redefines what a flow meter can do for you. This all-in-one gas mass ...
TSI
MASS FLOW METER 4040 SKU: 4040 Range: 0-300 L/min. Calibration: Air, O2, N2. Connection: 22 mm ISO. $1095.00 USD PRODUCT DETAILS Whether measuring gas flows in a laboratory, hospital ...
TSI
The TSI Mass Flowmeter 4043 (LCD, 0-200L/min Air, O 2 , N 2 1/2" tube) can be used for a multitude of gas flow measurement applications. Whether measuring gas flows in a laboratory or ...
TSI
... ultrasonic technology for mobile and highly accurate flow measurements Special features: ■ Very high measurement accuracy (also bidirectional) ■ Accurate even at extremely low flow rates (e.g. minimum ...
Volumetric flow rate: 0.4 l/h - 220 l/h
Process temperature: -20 °C - 65 °C
Process pressure: 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
Senseca Germany GmbH
Volumetric flow rate: 0.2 l/h - 80 l/h
Process temperature: -20 °C - 65 °C
Process pressure: 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
Senseca Germany GmbH
Volumetric flow rate: 1 l/min - 4,000 l/min
Process temperature: -20 °C - 65 °C
Process pressure: 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
Senseca Germany GmbH
Process temperature: -20 °C - 80 °C
Process pressure: 100 bar
sensor flow, Water, Calorimetric, Ø40mm 73long, G1/4 inch, 24V DC, PNP NO (NO), Plug-in connection M12 4pin, V4A, Pressure resistance 100bar, Manual adjustment including 1x Screwdriver Flow sensors ...
Process temperature: -50 °C - 180 °C
Process pressure: 0 Pa - 4,000,000 Pa
The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer ...
Process temperature: 0 °C - 160 °C
Precision: 1 %
... quick install, high performance • - Battery powered last for over 14 hours continuous opération • - Thickness measurement achievable UFM sériés Handheld Ultrasonic Flowmeter is mainly used for industrial ...
ATEK SENSOR TECHNOLOGIE
Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar
... reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation. EPD ...
FineTek Co., Ltd.
Process temperature: -20 °C - 60 °C
Precision: 2.5 %
... waves are dispersed is proportional to the flow rate of the liquid. Hence, the flow rate of the liquid is derived. EPU Clamp-On Ultrasonic Flowmeter No intrusion in the pipeline ...
FineTek Co., Ltd.
Process temperature: -156 °C - 60 °C
Process pressure: 10 bar
Repeatibility: 0.4 %
... measurement to get real flow signals, Elimination of bearing、Axial friction coefficient error and the leaf blade resistance error etc. Calculate the K value read. The company's flow test equipment, Testable ...
FineTek Co., Ltd.
Volumetric flow rate: 0.6 l/h - 1,000 l/h
Process temperature: -10 °C - 60 °C
Process pressure: 10 bar
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Service: Gases & Liquid Body Material: Polycarbonate (PC) O-Ring Material: ...
Golden Mountain Enterprise
Volumetric flow rate: 4 l/h - 200,000 l/h
Process temperature: -50 °C - 200 °C
Precision: 5, 2 %
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve.
Golden Mountain Enterprise
Volumetric flow rate: 0 l/h - 1,000 l/h
Process temperature: -24 °C - 54 °C
Process pressure: 10 bar
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Body Material: Acrylic plastic O-Ring Material: NBR (standard), Viton
Golden Mountain Enterprise
The DigitalFlow GF868 from Panametrics is a highly versatile, high performance flowmeter capable of many configurations with a large display and ample space for complicated wiring. Several options exist for I/O, including ...
Panametrics, a Baker Hughes business
... Panametrics is a compact and explosion-proof/flame-proof transmitter version of the Panametrics DigitalFlow GF868 flare gas mass flow meter. The DigitalFlow XGF868 is ideally suited for offshore installations ...
Panametrics, a Baker Hughes business
Process temperature: -40 °C - 150 °C
... AquaTrans AT600 is a liquid clamp-on flow meter designed to be accurate, durable and cost-effective. Rugged and reliable, this meter will remain fixed to your pipe for years to come. Applications The ...
Panametrics, a Baker Hughes business
Process temperature: -20 °C - 80 °C
Ultrasonic flowmeter TIME DELTA-C This clamp-on portable ultrasonic flowmeter consists of a detector clamped on the pipe (DN13 to 6000 mm depending on detectors) and of a and of a digital converter ...
FUJI ELECTRIC France
Process temperature: -20 °C - 80 °C
Ultrasonic flowmeter TIME DELTA-C Advanced type This clamp-on type portable ultrasonic flowmeter consists of a detector clamped on the pipe (DN13 to 6000 mm depending on detectors) and of a and of ...
FUJI ELECTRIC France
Process temperature: -20 °C - 80 °C
Precision: 1.5 %
... ultrasonic flowmeter M-Flow PW This ultrasonic portable flowmeter consists of a detector clamped on the pipe (DN25 to 1200 mm depending on detectors) and of a and of a digital converter ...
FUJI ELECTRIC France
Precision: 0.25, 0.4 %
Repeatibility: 0.5 %
... various sensor parameters, anticipating possible problems. The battery converter with integrated modem MV255, flow meters, energy meters, contact our specialists.
ISOIL Industria Spa
Process temperature: 0 °C - 100 °C
Process pressure: 25 bar
Precision: 2 %
... Description The electromagnetic insertion sensor MS3810, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems have been ISOIL Industria‘s passion and ...
ISOIL Industria Spa
Process temperature: -10 °C - 60 °C
Precision: 3, 0.5, 1 %
Repeatibility: 0.15 %
... Description The ultrasonic flow meter clamp-on for fixed installation IFX-F100, flow meters, energy meters, ultrasonic flowmeters, and industrial ...
ISOIL Industria Spa
The SeFlow 400 is Sewerin’s single channel portable flowmeter for applications in the municipal water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote ...
Volumetric flow rate: 5 l/min - 10 l/min
Process temperature: 0 °C - 60 °C
Process pressure: 6 bar - 20 bar
FLOW MASTER is a flow volumetric device which allows the constant monitoring of the lubrication delivering. As the measurements are volumetric, they don’t depend on temperature or viscosity but they ...
Dropsa spa
Process temperature: -20 °C - 40 °C
Process pressure: 10 bar - 400 bar
The Flow metering device is designed to volumetrically monitor small flow rates on low pressure lubrication systems. Its operation is based on the progressive system operating concept. The displacement ...
Dropsa spa
Process temperature: -20 °C - 70 °C
The "Flow Meter" uses a rotating oval gear concept with encapsulated magnets to provide a pulsed output that corresponds volumetrically to the flow through the flow-meter. The ...
Dropsa spa
Volumetric flow rate: 0 l/min - 20 l/min
Process temperature: 21 °C
Process pressure: 14.7 psi
... Overview » DPM mass flow meter DPM mass flow meter DPM mass flow meter, AALBORG A DPM With Readout - Product Summary Digital ...
Aalborg Instruments
Volumetric flow rate: 0.1 l/min - 45 l/min
Process temperature: 0 °C - 121 °C
Process pressure: 0 psi - 100 psi
... and PCTFE, the model F flow meter is excellent for high-purity applications or use with corrosive liquids. Units are available with a standard valve to monitor and control flow or without ...
Aalborg Instruments
Volumetric flow rate: 0.1 l/min - 45.4 l/min
Process temperature: 0 °C - 121 °C
Process pressure: 0 psi - 100 psi
... PTFE-PFA flow meters Incorporating the principles of traditional rotameter flow technology, these rugged PTFE-PFA flow meters offer solutions to low ...
Aalborg Instruments
Process temperature: -40 °C - 80 °C
... discharge in real-time. The discharge calculation module is included in the price of t060a-WF instrument. t060a-WF flow meter is used to monitor flow velocity and water level in open ...
Process temperature: -20 °C - 800 °C
Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no Venturi or similar conversions are required. Can be used in environments with low dust loads or in harsh conditions ...
ENVEA
Volumetric flow rate: 3 m³/s - 50 m³/s
Process temperature: 800 °C
... CEM Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS FEATURES & BENEFITS - Continuous high-quality measurement ...
ENVEA
Process temperature: 120 °C
Process pressure: 25 bar - 110 bar
FLOW MEASUREMENT FOR DENSE-PHASE CONVEYING Continuous solids mass flow measurement in dense-stream conveying and high levels of throughput Designed to measure solid flows ...
ENVEA
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining