- Hydraulics - Pneumatics >
- Valve >
- Valve >
- Weir
Weir valves
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
DN: 4, 6 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 150 °C
Valve NBZ-5 is a nebulizer of liquids with venturi effect operation and adjustable spout by means of a knurled ring. It is especially suitable for following uses : Lubrication of machine members. Lubrication and cooling ...
Bonesi Pneumatik s.r.l.
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...
Bonesi Pneumatik s.r.l.
DN: 0.5, 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
UM series one way valves are used when there is the need to keep under pressure one tube, allowing, at the same time, the flow if air to one way.
Bonesi Pneumatik s.r.l.
Planning, construction and delivery of high quality valves for power plant and process heat generation.
At ARIS, you receive high-quality electrical and pneumatic actuators and robust industrial fittings. We supply individual products for self-assembly or replacement drives and accessories. Of course, we also assemble ...
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
DN: 2.5 mm
Smooth operating spindle made of PTFE, valve bore: 0-2,5 mm, with retaining device to avoid complete unscrewing, screw cap and retaining device made of PP, operating temperature: -20 to +150 °C, made of DURAN® tubing, ...
The fast-closing float anti-explosion valve prevents propagation of flame and pressure during explosion to other production equipment. This valve is intended for protection of pipe transport systems.
RSBP spol. s.r.o.
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve ...
AKO ARMATUREN
DN: 10 mm - 250 mm
Pressure: 2 bar - 6 bar
... operated Pinch Valves. What are the benefits of air operated pinch valves? Free flow of product, minimum frictional resistance, 100% leak free, no blockages and low net weight are among the most important ...
AKO ARMATUREN
DN: 25 mm - 150 mm
Pressure: 6 bar
... air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air operated pinch valve ...
AKO ARMATUREN
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 80 °C
Brass float valve Novo • - Brass float valve, screwed ends • - Used for water • - BS 21 / ISO 7-1-1994 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • - Max working temperature: 80°C
Viet - Tiep Joint Stock Company
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
Brass gate valve Novo • - Non rising stem, solid wedge, screwed ends • - Used for water, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 16 bar ~ 16 kg/cm² • ...
Viet - Tiep Joint Stock Company
DN: 15, 20 mm
Pressure: 16 bar
Temperature: 120 °C
Brass ball valve Novo • - Brass ball valve, screwed ends • - Used for water, steam, gas, petroleum • - Blue color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: ...
Viet - Tiep Joint Stock Company
DN: 0.75, 0.5 in
Pressure: 150, 300 psi
Temperature: 358, 550 °F
... Control Four-V Port Globe Valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you to fine-tune the blowdown flow ...
Walchem
DN: 0.5, 0.75, 1 in
Pressure: 250 psi
Temperature: 400 °F
The Motorized Ball Valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer. The motor is protected in a NEMA 4X enclosure and features ...
Walchem
DN: 0.5 in
Pressure: 30 psi - 125 psi
Walchem’s economical Tri-Purpose Valves are three valves in one. Installed in one direction, the spring loaded PTFE faced diaphragm provides 30 psi of back pressure and anti-syphon protection. Installed ...
Walchem
Pressure: 5 bar
... Rotary Tube Selector Valve diverts pneumatically conveyed powders and granules from one line up to any of sixteen lines. Flow can also be converged from multiple lines into one line. Valve is often used ...
GEA Colby
Pressure: 500,000 Pa - 700,000 Pa
... Selector Valves are flow diversion valves that employ an axially mounted plate to control the flow of pneumatically transported materials. Flow may be diverted to one of two tubes, which intersect at ...
GEA Colby
... all product contact areas for frequent cleaning, making these valves suitable for use in all dairy, food, pharmaceutical & chemical applications - powder or granular. Configuration: Valves come as standard ...
GEA Colby
DN: 6 in - 84 in
For High Pressure Differential Applications Description The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed ...
Celeros
DN: 3 mm - 24 mm
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
Celeros
DN: 2 mm - 30 mm
This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...
Celeros
DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
DN: 40 mm - 70 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
DN: 50, 65, 80 mm
Pressure: 0.5 bar - 1.5 bar
Temperature: -20 °C - 80 °C
The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
DN: 0.5 in - 12 in
Pressure: 175 psi
Temperature: 121 °C
... Bell & Gossett, assures optimum system flow balance at minimum pump operating horsepower. Valves can simply be pre-set using the B&G Circuit Setter Balance Valve Calculator, curve booklet G10091, or the ...
Bell & Gossett Domestic Pump
DN: 0.5 in - 6 in
Flow rate: 0 us gal/min - 880 us gal/min
... calculations when selecting control valves Always maintains 100% authority, ensuring excellent control Combination valve reduces cost and more accurate flow control lowers lifecycle costs ...
Bell & Gossett Domestic Pump
DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C
Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...
Bell & Gossett Domestic Pump
DN: 2 in - 12 in
... available • Integral top-works direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves ...
HABONIM
DN: 2 in - 12 in
Pressure: 420 bar
... guidelines). Up to 15° from the vertical axis for the 6” bonnet (not BS6364 compliant). Flow direction indicators (for valves with preferred flow direction) Highly visible arrows on body and bonnet top. “T” mark ...
HABONIM
DN: 0.25 in - 8 in
Pressure: 1,494 psi
High Pressure Cryogenic Class 2500, full differential pressure for sizes up to and including 2″ (DN50), differential pressure of up to 103 bar (1494 psi) for sizes 2½” (DN65) and above with hybrid seats. Pressure containing parts are ...
HABONIM
Pressure: 28,000,000 Pa
Temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 120 l/min
... swing motor LS control + constant horsepower control Good for straight traveling of wheel motors Various kinds of attached valves
NACHI America
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 3, 5.5 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C
2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of casing: Brass chromed Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 10, 15, 20, 25 mm
Temperature: -20 °C - 150 °C
2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Function principle: 2/2-ways Actuation type: manually Material of casing: Brass nickel-plated Material of ball: Brass ...
Mader
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
HANSA FLEX AG
DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
HANSA FLEX AG
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
Sealing form 1 - 3 Shape A Connection 1 - 3 BSP cylindrical internal threads Bore L shaped Contact travel 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, ...
HANSA FLEX AG
DN: 4 mm
Pressure: 500 bar
... SAE J 514 (UN/UNF), ISO 8434-3 (ORFS), DIN 2353/ISO 8434-1 (24° taper, light and heavy series) Ball Valve Mild Steel, zinc/iron-plated 3-way Ball Valves 24° 06L
STAUFF
DN: 10 mm
... evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. The MAC “lifting” configuration is unique, however, in that the valve maintains a ...
DN: 14 mm
... evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. The MAC “lifting” configuration is unique, however, in that the valve maintains a ...
DN: 21 mm
... evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. The MAC “lifting” configuration is unique, however, in that the valve maintains a ...
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
The new KLINGER ball valve Monoball KHO is fully welded and generally used in the sector district heating, heating- and air conditioning and plant construction. The product is durable, functional, maintenance-free and ...
KLINGER
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C
Body material Ductile iron GGG50 PN (end) PN10/16-ASA150-JIS10K Contact sealing Heat EPDM Disc material Ductile iron GGG50 coated Connection between flanges Operating system Lever
TECOFI
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining