Flow: 5 l/h - 8 l/h
Head: 2.5 m - 5 m
Servers & Data Center Liquid Cooling Pump Motor:bldc motor Application:High Density Server liquid cooling system Servers Liquid Cooling Pump Features: 1. DC brushless motor with long lifetime ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C
Centrifugal Brushless DC 24V 12V Mini Water Pump Specification: voltage:12v or 24v flow rate: 7L/min 9L/min 12L/min water head:3M 5M 8M Feature: ◇Advanced magnetic driving technology for static-seal,without ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0 l/min - 6.5 l/min
Head: 2.5 m
Power: 5.16 kW
... dispenser For more product & factory information, please contact info@topsflo.com http://www.topsflo.com/brushless-dc-pump/24v-dc-water-pump-tl-b03h.html
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Pressure: 100,000 psi
Fluid temperature: 5 °C - 40 °C
Length: 84 in
Cutting speed increased 50% Cost savings 28% Cutting metal thickness 300mm Motor Rating:45kw/60HP Pressure Range (Deadhead):90,000psi(6200 bar) Flow Rate at Max. Pressure:0.78 gal/min Attenuator Volume:2L Length:83.7in Width:53.7in Height:59.3in
WIN-WIN WATERJET CO.,LTD.
Flow: 7.6 l/min
Pressure: 420 MPa
Power: 100 ch
1 PUMP DRIVE 5 CUTTER HEADS INTENSIFIE PUMPS CAN OPERATE A LOW TEMPERATURES IN HIGH-TEMPERATURE ENVIRONMENTS 10 YEARS, TECHNICAL BREAKTHROUGH Motor Rating：75kW/100HP Pressure Range (Deadhead) ：60,000psi Flow ...
WIN-WIN WATERJET CO.,LTD.
Flow: 3.8 l/min
Pressure: 320 MPa - 380 MPa
Power: 50 ch
Adopt servo motor Save on costs 30% Dual intensifier, continuous operation for 24 hours Motor Rating：37kW/50HP Pressure Range (Deadhead) ：60,000psi Max. Flow Rate at Max. Pressure (60 Hz)：1.00gal/min Attenuator Volume：2L Length：67.7in Width：45.6in Height：59.3in
WIN-WIN WATERJET CO.,LTD.
Flow: 43 l/min
Power: 216, 240 W
Length: 140 mm
Electric vane pump, 12 VDC and 24 VDC, selfpriming, for the transfer of diesel, with transport handle, ON-/OFF-switch and 2 m – cable with alligator clamps for battery connection.
Flexbimec
Flow: 6, 1, 15 l/min
Length: 180, 165 mm
Width: 230, 160 mm
Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze and pump ...
Flexbimec
Flow: 15, 6 l/min
Length: 165, 185 mm
Width: 160, 240 mm
Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Pump body in brass, gears in bronze and pump shaft in stainless ...
Flexbimec
Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar
The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed ...
Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Srl
Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Srl
Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg
Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.
Srl
Pressure: -950 mbar - 140,000 mbar
Pneumatic pressure test pump LMP 140 is a hand pump operated and designed to generate pressure range -950 mbar ... 100 /140 bar. 0,1 mbar pressure resolution. Build-in filters to protect from dirt and ...
Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS ...
Speroni
Flow: 35 l/min
Head: 38 m
Power: 0.37 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid im pu rities. LIMITS ...
Speroni
Flow: 40, 60 l/min
Head: 38, 58 m
Power: 0.37, 0.6 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS ...
Speroni
Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
OMG sas di Gibogini Stefano e C
ALLOWS THE DESIRED QUANTITY OF SERUM WITH ABSOLUTE PRECISION AND GRADUALITY TO BE DISTRIBUTED INSIDE THE DOUBLE FILLERS. An optimal system, which docs not altor tho charactoristics of tho sorum graft. Equipped with remote control, ...
Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm
... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.12 l/min - 1.52 l/min
Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm
SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... supply / transfer with recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP SPECIFICATIONS Lower ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... Max Rec'd Cycles / Minute - 90 Displacement Per Cycle - 120cc Air consumption @ 6 bar - 280 Nlpm SPECIFICATIONS: Lower Pump Material - Stainless Steel Pumping stem material - Stainless Steel Hard Chrome opt. ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... Max Rec’d Cycles / Minute - 90 Displacement Per Cycle - 120 cc Air consumption @ 6 bar - 280 N.l.p.m. SPECIFICHE: Lower Pump Material - Stainless Steel Pumping stem material - Stainless Steel Hard Chrome opt. 316 ...
Airmation ECP srl
Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W
Pressure type Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...
HIBLOW
Flow: 80, 40, 60 l/min
Pressure: 12,800, 14,700 Pa
Power: 39, 58, 30 W
... control “Dust trap filter” Easy restart by micro swith (XP-60 / 80 only) No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...
HIBLOW
Flow: 18, 20 l/min
Pressure: 9,800 Pa
Power: 17 W
Pressure type Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Bubble bath (air bubble injection) • Oxygen supply for fish breeding
HIBLOW
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
CELEROS
Flow: 12,000 m³/h
Fluid temperature: 80 °C
... concrete volute pump Product Category: SPECIALIZED PUMPS Concrete volute pumps are designed for high flow applications, resulting in fewer pumps...... Concrete ...
CELEROS
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... radially split pump Product Category: BETWEEN BEARINGS CUP-BB5HP encompasses heavy duty, radially split diffuser type multi-stage pumps..... The ClydeUnion Pumps CUP-BB5HP encompasses ...
CELEROS
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...
KD Scientific's Infusion Syringe pumps are suitable for transporting accurate amounts of liquid for numerous syringe pump operations. These applications include the infusion of calibrant into a mass spectrometer ...
KDS
Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm
High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
The PCP 005 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
The PCP 015 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
The PCP 050 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...
DAV TECH Srl
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
The UPMD725 RC pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil ...
Description USB connectable plug&play syringe pump for jfermi bioreactor
Flow: 0.0007 l/h - 0.02 l/h
Peristaltic pump peristaltic, pump, jFermi, 3D, modelperistaltic, pump, jFermi, 3D, model $300.00 Additional or replacement pump (Feed/Acid/Base/Antifoam) for ...
Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C
ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...
Argal Pumps
Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...
Argal Pumps
Flow: 450 l/min
Pressure: 8 bar
Head: 70 m
The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure ...
Argal Pumps
Flow: 3,200 m³/h
Pressure: 90 bar
Head: 480 m
... overhung process pump, designed and built in accordance with the latest edition of API 610 (OH2 type), and with over 130 hydraulic combinations available. Overview Designed for all fluids and process conditions, the ...
RUHRPUMPEN
Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C
... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series are a type of positive displacement ...
RUHRPUMPEN
Flow: 100 m³/h - 20,000 m³/h
Pressure: 145 bar
Head: 10 m - 1,200 m
The process and transfer pump of ZLM design was developed for stringent demands. Is a special main pipeline pump recommended for applications with change of the flow during the lifetime of a pipeline. Applications ...
RUHRPUMPEN
Flow: 1.3 l/min
Pressure: 7, 238 bar
Weight: 16 kg
Larius is expert in high pressure industrial spray technology equipment for demanding protective coating airless application. The Vega 34:1 is an high pressure pneumatic spray package, robust and resistant, for industrial painting ...
LARIUS SRL
Flow: 3.8 l/min
Pressure: 210, 7 bar
Weight: 25 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available ...
LARIUS SRL
Flow: 3 l/min
Pressure: 6.5, 260 bar
Weight: 25 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available ...
LARIUS SRL
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...
Bürkle
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...
Bürkle
Flow: 4 l/min - 30 l/min
OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids that are ...
Bürkle
Please specify:
Help us improve:
remaining