Testador de isolamento UHV-344
de tensãode alta tensãodielétrico

Testador de isolamento - UHV-344 - Wuhan UHV Power Technology Co.,Ltd. - de tensão / de alta tensão / dielétrico
Testador de isolamento - UHV-344 - Wuhan UHV Power Technology Co.,Ltd. - de tensão / de alta tensão / dielétrico
Testador de isolamento - UHV-344 - Wuhan UHV Power Technology Co.,Ltd. - de tensão / de alta tensão / dielétrico - imagem - 2
Testador de isolamento - UHV-344 - Wuhan UHV Power Technology Co.,Ltd. - de tensão / de alta tensão / dielétrico - imagem - 3
Testador de isolamento - UHV-344 - Wuhan UHV Power Technology Co.,Ltd. - de tensão / de alta tensão / dielétrico - imagem - 4
Guardar nos favoritos
Comparar

Características

Tipo de teste
de tensão, de alta tensão, de isolamento, potência, de temperatura, dielétrico
Produto testado
para transformador, de instalação, de instalação elétrica
Aplicações
industrial, para sistema de alimentação, para torre de turbina eólica

Descrição

Product Introduction
Widely used in the installation and maintenance of various large transformer equipment, wind power generation, thermal power generation, power supply bureaus, etc., for oil purification and vacuum hot oil circulation drying. For the purification of insulating oil in transformers of 35KV-110KV-220KV, vacuum drying can be performed simultaneously with filtration. The dual-stage vacuum oil filter provides dehydration and degassing to quickly remove moisture, gases and harmful components such as light hydrocarbons from the oil. It includes a precision multi-stage filtration system for progressively finer removal of mechanical impurities; an electric heating constant-temperature automatic control system ensures rapid and uniform oil heating and eliminates dead oil zones; it also includes vacuum pumping and vacuum oil injection functions and can perform ultimate vacuum extraction for transformers and GIS electrical equipment, meeting various on-site requirements.

Working principle and process
After passing through the magnetic filter, the treated oil enters the coarse filter heater for heating. The heated oil is pumped through the second-stage filter into a spiral spray atomization system, forming a coarse-grained fog that falls into the reaction tower and enters the vacuum separation chamber where moisture begins to evaporate. The oil mist and the multi-dimensional evaporation structure inside the tank allow rapid purification in a short cycle. Dehydrated, degassed and purified oil is completed through precision filtration under the action of the oil exhaust pump. Water vapor and hot air separated from the vacuum separation chamber are condensed in a water tank and remaining hot air/gases are discharged by a vacuum pump after cooling.

Technical parameters
Item | Unit | Spec
Model | | SY/ZD-RM-150
Volume of flow | L/min | 150
L/H | | 8000-10000 (Variable frequency adjustable)
Temperature control range | ℃ | 0~100
Working temperature | ℃ | 20~60
Extreme vacuum | Pa | ≤20
Working vacuum degree | Mpa | -0.06 ~ -0.099
Gas content in oil | % | ≤0.1
Work pressure | Mpa | ≤0.5
Filtration accuracy | µm | ≤1
Water content in oil | ppm | ≤3
Oil breakdown voltage | KV | ≥65
Heating power | KW | 72
Total power | KW | 80
Power supply | | Three-phase five-wire system 380V 50HZ
Inlet/outlet pipe diameter | mm | 50
Continuous working hours | H | ≥800
Trouble-free working hours | H | ≥8600

Oil quality indicators after insulating oil treatment
Performance project | Unit | Post-processing indicators | Test method
1. Moisture content | % | none | GB/T511
2. Moisture content | PPM | ≤3 | GB/T7600
3. Pressure resistance value | KV | ≥65KV | GB, DL or IEC standards
4. Residual gas | % | ≤0.5 | Gas content measurement methods in accordance with relevant GB, DL or IEC standards
5. Acid value | | 1µm

Product features
  • The combination of high vacuum, high pumping speed, annular three-dimensional compound flash evaporation technology and microgram technology efficiently removes water, dissolved micro water, free carbon and gases.
  • Multi-layer polymer mesh filtration combined with strong magnetic electrostatic adsorption for impurity removal: large filtration area, high pollutant holding capacity and high filtration accuracy (ß 3 ≥ 1000).
  • Compound three-in-one protection device provides automatic protection for high/low oil levels, infrared bubble detection, liquid level control, temperature maintenance and pressure protection — high automation, sensitive and reliable.
  • Specially suitable for vacuum oil injection, large-scale vacuum pumping and vacuum drying of transmission and transformation equipment above 110KV during installation or maintenance.
  • Online oil filtration capable of unmanned operation; operating status indicated by indicator lights.
  • Humanized design: low noise, simple operation, long maintenance intervals, low energy consumption and operation cost savings.

Function of Two-Stage Vacuum Oil Filter
The machine implements high-efficiency dehydration, degassing, filtration and drying of transformer insulating oil. Main components include: oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature control and automatic oil temperature control system, electrical control cabinet, steel frame and other equipment. The machine surface uses plastic spraying for a smooth bright finish. It provides filtration, purification and regeneration functions to efficiently remove moisture, gas and mechanical impurities in insulating oil.

Caractéristiques / spécifications techniques
  • Modèle: SY/ZD-RM-150 (référence interne)
  • Débit: 150 L/min (8000-10000 L/h variable par fréquence)
  • Plage de contrôle température: 0 ~ 100 ℃; Température de travail: 20 ~ 60 ℃
  • Vide extrême: ≤20 Pa; Degré de vide de travail: -0.06 ~ -0.099 Mpa
  • Teneur en gaz dans l'huile: ≤0.1 %; Teneur en eau après traitement: ≤3 ppm
  • Précision de filtration: ≤1 µm; Tension d'amorçage de l'huile: ≥65 KV
  • Puissance de chauffage: 72 KW; Puissance totale: 80 KW
  • Alimentation: triphasée 380V 50Hz
  • Diamètre tuyau entrée/sortie: 50 mm
  • Heures de fonctionnement continu: ≥800 H; Heures de fonctionnement sans incident: ≥8600 H

Catálogos

Não estão disponíveis catálogos para este produto.

Ver todos os catálogos da Wuhan UHV Power Technology Co.,Ltd.

Outros produtos Wuhan UHV Power Technology Co.,Ltd.

Testador de transformador

* Os preços não incluem impostos, transporte, taxas alfandegárias, nem custos adicionais associados às opções de instalação e de ativação do serviço. Os preços são meramente indicativos e podem variar em função dos países, do custo das matérias-primas e das taxas de câmbio.
Sobre a DirectIndustry
DirectIndustry é um marketplace que oferece aos intervenientes B2B uma experiência completa, desde o sourcing de produtos até à compra. DirectIndustry é uma entidade do VirtualExpo Group.