Pressure: 200, 280 bar
... 280 bar progressive system - Power supply: 12 V DC and 24 V DC - Outlets: 10 pumping unit - Reservoirs: 1.2 l follower plate 700 cc and 400 cc cartridge
Flow: 0 l/min - 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW
This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, there is also ...
Flow: 1 m³/s
Pressure: 1 bar - 3.44 bar
... The LINE pumps are capable of providing the exact flow rate of fluid at high pressures either for lubrication purposes or hydrostatic lubrication. It is particularly suited for centralized lubrication systems. The ...
The simple and versatile oil pump for progressive systems Key features: - Pumping system: single acting pneumatic piston - Control air supply pressure: 3 ~ 6 bar - Flow rate: 2 cm³ / stroke - Compression ratio: 50:1 ...
The pump develops a pressure higher than the control hydraulic one. The pump is composed of a steel body with temperate and lapped piston. The control group is composed of a cylinder, inside ...
Trolley mounted pneumatic pumps are particularly suited for the lubrication of male, ball and gate valves. They can be easily transported to the area of use as they are installed on a trolley. The trolleys ...
Flow: 0 m³/h - 0 m³/h
Robust construction with proved long life. Pumps supply 4.5 gr. lubricant per stroke and can overcome a maximum back pressure of 350 bar.The lubricant supply takes place during the downwards stroke of the operating ...
Flow: 0 m³/h - 0 m³/h
Pump with Hoist 400320 and 400332 consist of a pneumatic-driven pump, a hoist and a follower plate. Pump with Hoist 400332 is also completed with an electro-pneumatic inverter. ...
Piston pump for feeding facilities centralized lubrication Single line 01. Positioned in the center of the installation compared to the two lines it allows to improve the length of the facility. It can be used ...
Cam or impulses operated pump Pump control is by an eccentric cam or pulses. The maximum stroke of the piston is mm. 8. It's necessary to ensure that the piston does not touch the bottom.