Motor-driven rotary table DZDC-200-250/250-105/35.5-A26-A/A1

horizontalfor machiningcompact

Product overview
The DZDC-200-A1 is a compact cradle (cradle table) designed for five‑axis machining applications where reduced footprint and moderate torque are required. Both A and C axes use direct‑drive torque motors, reach maximum speeds up to 250 rpm, and employ natural cooling to simplify peripheral systems and integration.

Technical data (table)
Model: DZDC-200-250/250-105/35.5-A26-A/A1
A axis | C axis
Disk surface diameter (mm) | / | 200
Center height (mm) | 135 | /
Disk height (mm) | / | 137.5
Center hole diameter (mm) | / | /
Clamping Way | Air (0.5-0.55MPa) | Air (0.5-0.55MPa)
Clamping Torque (N.m) | ≥235+60 | ≥235
Disk surface runout (mm) | / | ≤0.005
Disk Radial runout (mm) | / | ≤0.005
Driving Type | Torque motor direct drive | Torque motor direct drive
Voltage for Driver (V) | 220 | 220
Rated/Maximum Speed (rpm) | 200/250 | 175/250
Rated/Maximum Torque (N.m) | 105/332 | 35.5/77.85
Rated/Maximum Current (A) | 8.5/30 | 2.15/5.4
Power output S1 100% (kW) | 2.2 | 0.65
Power Output S6 40% (kW) | 3.29 | 0.975
Air seal gas flow rate (L/min) | / | /
Cooling system | Natural cooling | Natural cooling
The cooling flow rate | / | /
Motor temperature sensor type | KTY84-130 | KTY84-130
Positioning Precision (arc-sec) | Grating ±10(20) Time grating ±5 (10) | Grating ±10(20) Time grating ±5 (10)
Repeated Positioning Precision (arc-sec) | Grating ±2(4) Time grating ±1.5 (3) | Grating ±2(4) Time grating ±1.5 (3)
Minimum unit (") | 0.001 | 0.001
Load Capacity (kg) | vertical 35 / level 45 (applies to unit) | (see above)
Weight (kg) | 130 (total) | (see above)
Level of Protection | IP66 | IP66
Match: Lync, HNC, SYNTEC, FANUC, SIENMENS, MITSUBISHI control systems

Features / technical specifications

• Model designation: DZDC-200-A1 (variant: DZDC-200-250/250-105/35.5-A26-A/A1).
• Disk surface diameter (C axis): 200 mm.
• Center height: 135 mm (A axis).
• Disk height (C axis): 137.5 mm.
• Clamping method: pneumatic (air 0.5–0.55 MPa) for both axes.
• Clamping torque: A axis ≥235+60 N·m; C axis ≥235 N·m.
• Disk surface/runout: ≤0.005 mm (C axis).
• Driving type: torque motor direct drive on A and C axes.
• Driver voltage: 220 V.
• Speed (rated/max): A axis 200/250 rpm; C axis 175/250 rpm.
• Torque (rated/max): A axis 105/332 N·m; C axis 35.5/77.85 N·m.
• Current (rated/max): A axis 8.5/30 A; C axis 2.15/5.4 A.
• Power output S1 100% (A/C): 2.2 kW / 0.65 kW. S6 40% (A/C): 3.29 kW / 0.975 kW.
• Positioning accuracy and repeatability specified in arc‑seconds (see table).
• Minimum programmable unit: 0.001".
• Load capacity: vertical 35 kg / horizontal (level) 45 kg.
• Unit weight: 130 kg.
• Protection rating: IP66.
• Cooling: natural cooling (both axes).
• Motor temperature sensor: KTY84-130.
• Compatible CNC controls: Lync, HNC, SYNTEC, FANUC, SIENMENS, MITSUBISHI.