Motor-driven rotary table DZDC-320-200/250-300/105-A26W-A/A12 - A Axis / C Axis

horizontalfor machiningdirect-drive

Overview
The A12 configuration of the DZDC-320-A12 is a low-profile five-axis cradle table combining a 320 mm C-axis disk with a 183 mm disk height and a unit weight of 230 kg. Rated load capacity is 70 kg vertical or 80 kg horizontal; installation profile and load orientation are primary selection factors.

Technical data
Model: DZDC-320-200/250-300/105-A26W-A/A12 (A axis / C axis)
Disk surface diameter (mm): C axis 320
Center height (mm): A axis 180
Disk height (mm): C axis 183
Center hole diameter (mm): C axis 65
Clamping: pneumatic air 0.5–0.55 MPa (A and C)
Clamping torque (N·m): A axis ≥560; C axis ≥235
Disk surface runout (mm): C axis ≤0.006
Disk radial runout (mm): C axis ≤0.005
Drive type: torque motor direct drive (A and C)
Driver voltage (V): 220
Speed (rpm) rated/max: A 200/200; C 200/250
Torque (N·m) rated/max: A 300/600; C 105/332
Current (A) rated/max: A 16/36; C 8.5/30
Power output S1 100% (kW): A 6; C 2.2
Power output S6 40% (kW): A 7.2; C 3.29
Cooling: A axis water cooling (flow ≥2.7); C axis natural cooling
Motor temperature sensor: KTY84-130
Positioning precision / repeatability: see technical table (arc-sec)
Minimum unit: 0.001"
Load capacity: vertical 70 kg / horizontal 80 kg
Weight: 230 kg
Protection rating: IP66
Compatible controls: Lync, HNC, SYNTEC, FANUC, SIENNEMS, MITSUBISHI

Applications
Low-profile five-axis cradle for integration into CNC machining centers where compact installation and multi‑angular access are required. Suited to indexed and simultaneous machining of medium‑to‑small complex components where orientation and space constraints drive fixture choice.

Features / technical specifications

• Model: DZDC-320-A12 (A12 configuration)
• Disk diameter (C axis): 320 mm
• Disk height (C axis): 183 mm; Center height (A axis): 180 mm
• Center bore: 65 mm (C axis)
• Pneumatic clamping: 0.5–0.55 MPa
• Clamping torque: A ≥560 N·m, C ≥235 N·m
• Runout (C axis): surface ≤0.006 mm; radial ≤0.005 mm
• Direct-drive torque motors on A and C axes
• Driver voltage: 220 V
• Speeds: A 200/200 rpm; C 200/250 rpm
• Rated/peak torque and current as specified above
• Cooling: A axis water-cooled (flow ≥2.7), C axis natural cooling
• Motor sensor: KTY84-130
• Positioning resolution and repeatability provided in arc‑sec table
• Minimum interpolation unit: 0.001"
• Load capacity: vertical 70 kg / horizontal 80 kg
• Unit weight: 230 kg; Protection: IP66
• Supported CNC controls: Lync, HNC, SYNTEC, FANUC, SIENNEMS, MITSUBISHI