Motor-driven rotary table DZDC-260-A10

horizontalfor machiningdirect-drive

Introduction
The A10 version reduces the C-axis disk height to 180 mm while retaining a 260 mm face and 600 Nm A-axis peak torque. Its 70 kg vertical and 80 kg horizontal ratings suit machines where workpiece height and load orientation both matter.

Technical Data (table)
Parameter — A axis | C axis
Disk surface diameter (mm) — / | 260
Center height (mm) — 180 | /
Disk height (mm) — / | 180
Center hole diameter (mm) — / | 65
Clamping Way — Air (0.5-0.55MPa) | Air (0.5-0.55MPa)
Clamping Torque (N.m) — ≥560 | ≥235
Disk surface runout (mm) — / | ≤0.005
Disk radial runout (mm) — / | ≤0.005
Driving Type — Torque motor direct drive | Torque motor direct drive
Voltage for Driver (V) — 220 | 220
Rated/Maximum Speed (rpm) — 200/200 | 200/250
Rated/Maximum Torque (N.m) — 300/600 | 105/332
Rated/Maximum Current (A) — 16/36 | 8.5/30
Power output S1 100% (kW) — 6 | 2.2
Power Output S6 40% (kW) — 7.2 | 3.29
Cooling system — Water cooling | Natural cooling
Cooling flow rate — ≥2.7 | /
Motor temperature sensor type — KTY84-130 | KTY84-130
Positioning Precision (arc-sec) — Grating ±10 (20) Time grating ±5 (10) | Grating ±10 (20) Time grating ±5 (10)
Repeated Positioning Precision (arc-sec) — Grating ±2 (4) Time grating ±1.5 (3) | Grating ±2 (4) Time grating ±1.5 (3)
Minimum unit ("") — 0.001 | 0.001
Load Capacity (kg) — vertical 70 / level 80
Weight (kg) — 215
Level of Protection — IP66
Note: Control systems — Lync, HNC, SYNTEC, FANUC, SIENNEMS, MITSUBISHI

Features / Technical specifications

• Model: DZDC-260-A10
• Brand: Haozhi
• Disk surface diameter (C axis): 260 mm
• Center height (A axis): 180 mm
• Disk height (C axis): 180 mm
• Center hole diameter (C axis): 65 mm
• Clamping way: Air (0.5-0.55 MPa) on both axes
• Clamping torque: A axis ≥560 N·m; C axis ≥235 N·m
• Disk runout (surface/radial) on C axis: ≤0.005 mm
• Driving type: Torque motor direct drive (A and C)
• Driver voltage: 220 V (A and C)
• Rated/Maximum speed: A axis 200/200 rpm; C axis 200/250 rpm
• Rated/Maximum torque: A axis 300/600 N·m; C axis 105/332 N·m
• Rated/Maximum current: A axis 16/36 A; C axis 8.5/30 A
• Power output S1 100%: A axis 6 kW; C axis 2.2 kW
• Power output S6 40%: A axis 7.2 kW; C axis 3.29 kW
• Cooling: A axis water cooling (flow ≥2.7); C axis natural cooling
• Motor temperature sensor: KTY84-130 (A and C)
• Positioning precision: Grating ±10(20), Time grating ±5(10) (A and C)
• Repeated positioning precision: Grating ±2(4), Time grating ±1.5(3) (A and C)
• Minimum movement unit: 0.001" (A and C)
• Load capacity: vertical 70 kg / level 80 kg
• Weight: 215 kg
• Protection level: IP66
• Compatible control systems: Lync, HNC, SYNTEC, FANUC, SIENNEMS, MITSUBISHI