Motor-driven rotary table DZDC-800-100/100-4500/2250-A50W-HJH1

verticalfor machiningdirect-drive

Overview
Designed for the largest workpieces in the range, the DZDC-800 combines an 800 mm table with a 1,500 kg payload. Hydraulic clamping, water-cooled A/C axes and torque-motor direct drive provide the peak torque required for heavy five-axis machining.

Main highlights

• Face diameter (C axis): Ø800 mm
• Payload / Load capacity: 1500 kg
• Hydraulic clamping (oil)
• Water-cooled A and C axes
• Torque motor direct drive for A and C axes
• Protection rating: IP66

Key published values
Max. torque: A axis: 5634.5×2 N.m; C axis: 5634.5 N.m
Rated/Maximum Speed (rpm): 100 / 100 (A / C)
Rated/Maximum Torque (N.m): A axis: 2254×2 / 5634.5×2; C axis: 2254 / 5634.5
Rated/Maximum Current (A): A axis: 49×2 / 122.5×2; C axis: 49 / 122.5
Power output S1 100% (kW): A axis: 23.6×2; C axis: 23.6
Power Output S6 40% (kW): A axis: 35.4×2; C axis: 35.4

Technical data (selected table entries)
Model: DZDC-800-100/100-4500/2250-A50W-HJH1
Disk surface diameter (mm): C axis: 800
Center height (mm): A axis: 325
Disk height (mm): C axis: 225
Center hole diameter (mm): C axis: 132
Clamping Way: A/C axis: Oil
Clamping Torque (N.m): A axis: 4200×2 (@5MPa); C axis: 4200 (@5MPa)
Disk surface runout (mm): C axis: 0.015
Disk radial runout (mm): C axis: 0.01
Driving Type: Torque motor direct drive (A and C axis)
Voltage for Driver (V): 380 (A and C)
Cooling system: Water cooling (A and C)
Cooling flow rate: A axis: ≥13×2 ; C axis: ≥13
Motor temperature sensor type: KTY84-130 (A and C)
Positioning Precision (arc-sec): A axis: ±5(10) ; C axis: ±7.5(15)
Repeated Positioning Precision (arc-sec): A axis: ±1(2) ; C axis: ±1.5(3)
Minimum unit (°): 0.001 (A and C)
Load Capacity (kg): 1500
Weight (kg): 2445
Level of Protection: IP66
Note - Control systems: FANUC, HNC, SYNTEC, SIEMENS, MITSUBISHI

Applications
The unit is intended for heavy five-axis machining of large workpieces where high peak torque, secure hydraulic clamping and water-cooled motor support are required.

Technical characteristics / specifications

• Model: DZDC-800-100/100-4500/2250-A50W-HJH1
• Commercial model name: DZDC-800
• Face diameter (C axis): Ø800 mm
• Payload / Load Capacity: 1500 kg
• Axis drive: Torque motor direct drive (A & C)
• Cooling: Water cooling for A and C axes
• Clamping: Hydraulic / Oil, clamping torque A: 4200×2 (@5MPa), C: 4200 (@5MPa)
• Rated/Max speed: 100 / 100 rpm
• Rated/Max torque: A: 2254×2 / 5634.5×2 N.m; C: 2254 / 5634.5 N.m
• Power S1 100%: A: 23.6×2 kW; C: 23.6 kW
• Power S6 40%: A: 35.4×2 kW; C: 35.4 kW
• Positioning precision: A: ±5(10) arc-sec; C: ±7.5(15) arc-sec
• Repeated positioning precision: A: ±1(2) arc-sec; C: ±1.5(3) arc-sec
• Minimum unit: 0.001°
• Center height (A): 325 mm; Disk height (C): 225 mm; Center hole diameter (C): 132 mm
• Disk runout: surface 0.015 mm; radial 0.01 mm
• Cooling flow rate: A: ≥13×2 ; C: ≥13
• Motor temp sensor: KTY84-130
• Weight: 2445 kg
• Protection rating: IP66
• Compatible control systems: FANUC, HNC, SYNTEC, SIEMENS, MITSUBISHI