Motor-driven rotary table DZDC-630-100/100-2600/1100-A26W-A/A - A Axis / C Axis

horizontalfor machiningdirect-drive

Introduction
The DZDC-630 is designed for high torque and strong clamping capability to support large workpieces. Dual A‑axis torque motors deliver up to 2,580 N·m each, while the C axis provides up to 2,100 N·m. Both axes use water cooling to sustain heavy, continuous machining.

Technical data (table)
Model: DZDC-630-100/100-2600/1100-A26W-A/A — A axis / C axis
Disk surface diameter (mm): A: / ; C: 630
Center height (mm): A: 295 ; C: / Disk height (mm): A: / ; C: 215 Center hole diameter (mm): A: / ; C: 130 Clamping method: Air (0.5-0.55 MPa) on both axes Clamping torque (N·m): A: 5600 (@0.5 MPa) ; C: 2800 (@0.5 MPa) Disk surface runout (mm): A: / ; C: 0.01 Disk radial runout (mm): A: / ; C: 0.005 Driving type: Torque motor direct drive (A and C) Voltage for driver (V): 380 (A and C) Rated/Maximum speed (rpm): 100/100 (A and C) Rated/Maximum torque (N·m): A: 1300*2 / 2580*2 ; C: 1100 / 2100 Rated/Maximum current (A): A: 29*2 / 59*2 ; C: 23.2 / 46.5 Power output S1 100% (kW): A: 13.5*2 ; C: 11 Power output S6 40% (kW): A: 20.25*2 ; C: 16.5 Cooling system: Water cooling (A and C) Cooling flow rate: A: ≥7.5*2 ; C: ≥7.5 Motor temperature sensor type: KTY84-130 (A and C) Positioning precision (arc-sec): A: ±5(10) ; C: ±7.5(15) Repeated positioning precision (arc-sec): A/C: ±1.5(3) Minimum unit ("): 0.001 (A and C) Load capacity (kg): 830 (both axes) Weight (kg): 1688 Level of protection: IP66 Compatible control systems: Lync, HNC, SYNTEC, FANUC, SIENMENS, MITSUBISHI

Features / technical specifications

• Model: DZDC-630-100/100-2600/1100-A26W-A/A
• Product type: High-Torque Five-Axis Cradle Table
• Disk surface diameter (C axis): 630 mm
• Center height (A axis): 295 mm
• Disk height (C axis): 215 mm
• Center hole diameter (C axis): 130 mm
• Clamping method: Air (0.5-0.55 MPa) on both axes
• Clamping torque: A axis 5600 N·m (@0.5 MPa); C axis 2800 N·m (@0.5 MPa)
• Drive: Torque motor direct drive on A and C axes
• Driver voltage: 380 V
• Rated/Max speed: 100/100 rpm (A and C)
• Rated/Max torque: A axis 1300*2 / 2580*2 N·m; C axis 1100 / 2100 N·m
• Rated/Max current: A axis 29*2 / 59*2 A; C axis 23.2 / 46.5 A
• Power output S1 100%: A axis 13.5*2 kW; C axis 11 kW
• Power output S6 40%: A axis 20.25*2 kW; C axis 16.5 kW
• Cooling: Water cooling; cooling flow A ≥7.5*2, C ≥7.5
• Motor temperature sensor: KTY84-130
• Positioning precision: A ±5(10) arc-sec; C ±7.5(15) arc-sec
• Repeatability: ±1.5(3) arc-sec
• Minimum unit: 0.001"
• Load capacity: 830 kg
• Weight: 1688 kg
• Protection rating: IP66
• Compatible controls: Lync, HNC, SYNTEC, FANUC, SIENMENS, MITSUBISHI