Communication gateway NT 50-CO-RS

industrialEthernetserial

Overview
netTAP 50 connects to communication networks and acts as a Gateway for simple conversions between one Real-Time Ethernet protocol (1-port) and one fieldbus protocol or one serial automation protocol as well as between one fieldbus protocol and one serial automation protocol. netTAP 50 supports Slave-to-Slave and Slave-to-Master conversions. As a master, netTAP 50 provides only one single slave device with the full master function. This makes it easy to integrate a single field device into any higher-level network.

Product design
The design of the netTAP 50 convinces by its compact hardware and is reduced to the basic requirements of a protocol converter. The converter is directed to market segments for which the factor costs has priority. This makes the netTAP 50 an attractively priced and universally applicable gateway that offers a wide variety of conversion options.

Highlights

• Integrates a Modbus RTU device into a CANopen network, and vice versa
• Integrates ASCII-protocol-supporting devices as nodes in CANopen
• Space-saving, compact design
• Loadable firmware for the flexible use of further conversions
• With diagnosis and configuration interface via Ethernet

Supported protocols

• Serial (ASCII)
• Serial (programmable)
• Modbus RTU Slave
• Modbus RTU Master
• CANopen Master
• CANopen Slave

Technical Data (table)
Product name : NT 50-CO-RS
Part number : 1756.100
Brief description : Gateway CANopen to RS-232/422/485
Communication controller : netX 50
RAM : 8 MB SDRAM
FLASH : 4 MB serial Flash
Supply voltage : 24 V ± 6 V DC
Current consumption at 24 V (typically) : 72 mA
Power connector type : Mini-COMBICON, 2-pin
Communication interface X2 : CANopen
Interface type (X2) : ISO 11898, optically isolated
Connector type (X2) : D-Sub male, 9-pin
Communication interface X3 : Serial interface
Interface type (X3) : RS-232, RS-422, RS-485
Connector type (X3) : RJ45 (Ethernet and serial interface together in one connector)
Diagnostic interface Type : Ethernet, 4-pin
Diagnostic connector type : RJ45 socket
Display : LED displays (SYS System status, APL Application status, COM Communication status, LINK Link / ACT Activity)
Ambient temperature (operation) : 0 °C … +60 °C
Ambient temperature (storage) : -40 °C … +85 °C
Relative humidity : 10 % … 95 %, non-condensing
Altitude : 0 m … 2000 m
Dimensions (L x W x H) : 100 x 26 x 66 mm (without connector)
Weight : appr. 80 g
Degree of protection : IP 20
Mounting type : on DIN rail EN 60715
Configuration software : SYCON.net
Conformity : RoHS: Yes
CE (EMC) : Yes
Emission : EN 55011 / BS EN 55011
Immunity : EN 61131-2 / BS EN 61131-2

Caractéristiques / spécifications techniques

• Model : NT 50-CO-RS
• Part number : 1756.100
• Function : Gateway for CANopen ↔ Serial (RS-232/422/485) and Modbus RTU conversions
• Controller : netX 50
• Memory : 8 MB SDRAM, 4 MB serial Flash
• Power : 24 V DC (±6 V), typical current 72 mA
• CANopen interface : ISO 11898, optically isolated, D-Sub 9-pin
• Serial interface : RS-232 / RS-422 / RS-485 (RJ45 combined with Ethernet)
• Diagnostic interface : Ethernet via RJ45
• Indicators : SYS, APL, COM, LINK/ACT LEDs
• Operating temperature : 0 °C to +60 °C (storage -40 °C to +85 °C)
• Dimensions : 100 x 26 x 66 mm (without connector); Weight ≈ 80 g
• Protection / Mounting : IP20 / DIN rail EN 60715
• Configuration tool : SYCON.net
• Standards & Conformity : RoHS, CE (EN 55011 emission; EN 61131-2 immunity)