Communication gateway NT 100-DP-CO

serialRS-485USB

Overview
netTAP 100 is a DIN-rail gateway for protocol conversion between PROFIBUS DP and CANopen. It supports conversions between Real-Time Ethernet (2-port) and a fieldbus or serial automation protocol, as well as between two fieldbus protocols. Licensed Master functionality is unrestricted, enabling master roles on supported fieldbuses.

Highlights

• Integrates a subordinate PROFIBUS network trunk into CANopen and vice versa
• Master capability for up to 125 PROFIBUS slaves or 126 CANopen nodes
• I/O data conversion cycle below 10 ms for fast data exchange
• Device replacement within seconds by loading configuration/firmware via removable memory card
• Loadable firmware enables flexible conversion configurations
• Diagnosis and configuration via USB interface

Supported protocols

• CANopen Master
• PROFIBUS DP Master
• PROFIBUS DP Slave
• CANopen Slave

Technical specifications

• Product name: NT 100-DP-CO
• Part number: 1718.160
• Function: Gateway PROFIBUS DP to CANopen
• Communication controller: netX (netX 100)
• RAM: 8 MB SDRAM
• Flash: 4 MB serial Flash
• Memory card: SD or MMC, max. 2 GByte
• Supply voltage: 24 V DC ± 6 V
• Max current at 24 V (typical): 130 mA
• Typical power consumption: 3.2 W
• Power connector: Mini-COMBICON, 2-pin
• Reverse voltage protection: yes
• UL requirement: use with isolated voltage source for UL compliance
• Interface X2: PROFIBUS-DP (RS-485, optically isolated), D-Sub 9-pin socket
• Interface X3: CANopen (ISO 11898, optically isolated), D-Sub 9-pin plug
• Diagnostic interface: USB (Mini-USB, 5-pin)
• Indicators: LEDs for SYS, APL, COM (duo red/green), CAN (duo red/green)
• Operating elements: Network address via 2 rotary switches
• Ambient temperature (operation): 0 … +60 °C
• Humidity: no condensation permitted
• Pollution degree: use in pollution degree 2 for UL-compliant operation
• Altitude: 0 … 2000 m
• Dimensions (L x W x H): 100 x 52 x 70 mm (without connectors)
• Weight: approx. 150 g
• Degree of protection: IP 20
• Mounting: DIN rail EN 60715
• Configuration software: SYCON.net
• RoHS: Yes
• UL certification: UL 508 (UL-File No E334100)
• CE: Yes
• UKCA: Yes
• Emission: CISPR 11 Class A
• Immunity: EN 61131-2 / BS EN 61131-2
• ESD (air discharge): ±8 kV Criterion B
• ESD (contact discharge): ±4 kV Criterion B
• Burst (Fast transient): ±2 kV Criterion A
• Surge (communication/data lines): ±1 kV Criterion A